16

Before establishing a Wi-Fi connection, ensure that the computer is equipped with

a wireless network adapter. If the computer indicates a wireless network connection,

the wireless network adapter can be used. Otherwise, verify that your wireless

network adapter is working properly.

3.

Click

View available wireless networks

to view a list of available wireless

networks.

4.

Select the wireless network connection with the Mobile WiFi's SSID and click

Connect

.

Note:



If the wireless network connection is encrypted, enter the correct wireless

network encryption key.



Press the WPS button twice to view the current SSID and wireless network

encryption key on the screen.

5.

Wait a moment for the wireless network connection icon to appear in the system

tray in the lower right corner of the computer screen. The wireless network

17

connection is then established.

Step 3: Connect to the Internet

If data is transmitted, the Mobile WiFi will automatically connect to the Internet. If data

is not transmitted for a period of time, the Mobile WiFi will automatically disconnect

from the network connection.

Note:

You can log in to the web management page and enable or disable the automatic

connection while roaming function. If this function is turned off, when the Mobile

WiFi enters a roaming network, it will automatically disconnect from the Internet

connection that has already been established.You will need to manually establish

this network connection again.

18

Logging In to the Web Management Page

1.

Make sure the connection between the Mobile WiFi and the Wi-Fi device or

computer is working normally.

2.

Open the browser, and enter

in the address box.

3.

Enter the user name and password to log in to the web management page.

Note:



The default user name is

admin

.



The default password is

admin

.

19

Daily Use

Battery Saving Mode

If the Mobile WiFi has been inactive for some time, it will go into standby mode, in

which the power indicator blinks slowly and the display screen turns off. Pressing any

button causes the display screen to light up. The default timeout is set to 10 mins, you

can change this in the web management page.

When the Mobile WiFi is being powered only by the battery, you can choose to enable

(default) or disable the automatic Wi-Fi turnoff function in the web management page.

If this function is enabled and if no Wi-Fi devices access the Mobile WiFi for a period of

time equal to the WLAN timeout setting, the Wi-Fi turns off automatically. You can press

any button to turn the Wi-Fi on again.

Verifying the PIN

If the PIN verification function is enabled, log in to the web management page and

20

enter the correct PIN according to the instructions. PIN/PUK codes are supplied by your

operator along with the SIM card. For details, please consult your operator.

Establishing a WPS Connection

If the Wi-Fi device to be connected to the Mobile WiFi

supports WPS, the wireless network encryption key is

generated automatically and there is no need to enter it

manually. The steps for WPS connection are as follows:

1.

Turn on the Mobile WiFi.

2.

Turn on the Wi-Fi device to be connected to the

Mobile WiFi.

3.

Activate the Mobile WiFi's WPS.

Note:

WPS