Page 6 / 12 Scroll up to view Page 1 - 5
4
Wi-Fi extender (optional)
The Wi-Fi extender feature increases Wi-Fi coverage and connects to Wi-Fi networks where
available to reduce mobile data usage.
1. From the HUAWEI HiLink app, touch Settings and enable the Wi-Fi extender feature.
2. Connect to a Wi-Fi network.
Your Mobile WiFi will connect to known Wi-Fi networks when the extender feature is
enabled.
Page 7 / 12
5
Appearance
Battery indicator
Green: Sufficient battery.
Blinking green: Charging the battery.
Red: Low battery.
Power button
Press and hold to turn your Mobile WiFi on or off.
Signal indicator
Green: Strong signal.
Orange: Weak signal.
Red: No signal.
RESET button
Press and hold to reset your Mobile WiFi and restore it to its factory settings.
If you forget the username, password or SSID for your Mobile WiFi, try restoring the
device to its factory settings.
Battery indicator
Micro USB
port
Signal indicator
RESET button
Power button
Page 8 / 12
6
Charging
0%
100%
0%
100%
Please only use compatible chargers provided by a designated manufacturer.
The charger is an optional accessory. To buy a charger, please contact an authorized
retailer.
Page 9 / 12
7
FAQs
Why isn't my Mobile WiFi responding?
Try restarting the device. If that doesn't work, restore the device to its factory settings.
Why can't I connect to my Mobile WiFi sometimes?
To save power, your Mobile WiFi's Wi-Fi auto off feature is designed to turn off Wi-Fi
when there haven't been connections for a while. You can press the POWER button to
turn on Wi-Fi again. Alternatively, you can disable this feature, although this might
impact battery life. Log in to the HiLink app or web interface and disable the Wi-Fi auto
off feature.
Why won't my Mobile WiFi connect to a network even though all the settings are
correct?
The PIN verification feature might be enabled. Launch HUAWEI HiLink and enter the
correct PIN.
You can disable this feature if you find entering the PIN regularly inconvenient.
From the HiLink app, select Settings and then disable the PIN verification feature.
Page 10 / 12
8
Why can't I access the web interface at 192.168.8.1?
This is likely due to an IP address conflict when the Mobile WiFi assigns itself a new IP
address. Please try 192.168.9.1 in this case.
If your Mobile WiFi has an LCD screen, the new IP address of your web interface will be
displayed.
Why won't my Mobile WiFi power on?
Your battery is probably out of power.
Charge your Mobile WiFi for a while and power it back on.
Why did my Mobile WiFi power off all of a sudden?
Your Mobile WiFi may overheat when you use it continuously over a long period of time,
and thereby trigger its automated protection system. Wi-Fi will be turned off and your
Mobile WiFi will power off if this occurs.
Please ensure the device is properly ventilated and cooled before you power it on again.
31010UNY_01

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top