Page 6 / 24 Scroll up to view Page 1 - 5
Page 7 / 24
1
Thank you for purchasing WiMAX CPE!
Before you begin
Check the following items in the product package. If you find anything missing or damaged,
contact the service provider.
±
WiMAX CPE
±
Dedicated Power Adapter
±
Ethernet Cable
±
Quick Start
±
Qualification Card
Getting to Know Your CPE
The supported functions and actual appearance of the CPE may vary with the product you
purchase. The following pictures are provided for illustration purpose only.
Top Panel
WiMAX
TEL1 TEL2
POWER
Page 8 / 24
2
Indicator
Status
Description
On
The indicators indicate the signal strength of the
WiMAX network.
When all the indicators are on, it indicates that the
signal strength is at the highest level.
Blink
The CPE is being upgraded when they blink
sequentially.
The software is damaged when they blink randomly.
WiMAX
Off
There is no WiMAX network signal.
On
The TEL interface is being used.
Blink
The TEL interface has an incoming call.
TEL1-TEL2
Off
The telephone connected to the TEL port hangs up or
the TEL interface is disabled.
On
The CPE is powered on.
POWER
Off
The CPE is powered off.
Notes:
±
WiMAX: Worldwide Interoperability for Microwave Access
±
CPE: Customer Premises Equipment
Rear Panel
LAN4
POWER
LAN1
LAN2
LAN1
LAN2
LAN3
LAN3
LAN4
TEL1
TEL2
Page 9 / 24
3
Interface/Indicator
Description
POWER
The interface is used to connect to the output interface of the
power adapter.
LAN
The interfaces are used to connect the CPE to the computer or
the switch.
The indicators are used to indicate the status of the devices
connected to the corresponding interfaces.
TEL
The interfaces are used to connect a telephone line.
Side Panel
The preceding figure shows the appearance of the side panel that is rotated 90 degrees
counterclockwise.
RESET
Button
Description
RESET
Press and hold the button for one to eight seconds to restart the CPE.
Press and hold the button for over eight seconds to restore the default
settings of the CPE.
Once you restore the default settings, all the customized data will
be lost. Use this function with caution.
Page 10 / 24
4
Preparing for Installation
Selecting a Proper Installation Position
±
Obstacles such as concrete or wooden walls may affect the transmission of WiMAX
network signals. Therefore, install the CPE in an open space.
±
Keep the CPE away from any household appliance that produces a strong electric or
magnetic
eld, such as a microwave oven, a refrigerator, or a satellite dish antenna.
Positioning the CPE
Rotate the support a maximum of 90 degrees counterclockwise as shown in the following
gure.
Connecting the Cables
CAUTION:
During lightning storms, power off the CPE, disconnect the CPE from the power supply, and
do not touch the antenna.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top