Huawei B68L Router Manual PDF (Setup & Configuration Guide)
Given below is full router user manual of Huawei B68L router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 20
B68L Wireless Gateway
Quick Start
Page 2 / 20
96722599_01
Page 3 / 20
1
1
Getting to know your B68L
Power button
Press and hold for about 3 seconds to power the
B68L on or off.
WPS button
Press and hold for 3 or more seconds to active WPS
connection when Wi-Fi is turned on.
LAN port
Connect to computer, switch, or other LAN device.
Power port
Connect to compatible power adapter.
Telephone port
Connect to telephone.
External antenna
port
Connect to external antenna.
Page 4 / 20
2
Network mode
indicator
Fast red blinking: no SIM/USIM card is found, the
PIN is not verified, or the SIM/USIM card is not
working properly.
Steady yellow: registered with a 3G/2G network.
Steady green: connected to the Internet.
Off: no signal.
Wi-Fi/WPS
indicator
Steady on: Wi-Fi turned on or data transfer in
progress.
Blinking: a WPS connection is being set up.
Off: Wi-Fi turned off.
Power indicator
On: the B68L is powered on.
Off: the B68L is powered off.
/
LAN indicator
Steady on: LAN port is connected to a client.
Off: no client is connected to LAN port.
SIM/USIM card
slot
Install a SIM/USIM card to access to the Internet via
a 3G/2G data connection.
Reset button
Restoring the default settings of the B68L will erase
all previous settings.
When the B68L is powered on, use a sharply pointed
object to press and hold for about 3 seconds until all
indicators are blinking to restore the B68L to its
factory settings. After the factory defaults are
restored, the B68L will restart automatically.
Page 5 / 20
3
2
Installation
Installing the SIM/USIM card
1.
Slide off the card slot cover.
2.
Insert the SIM/USIM card into the card slot. Ensure that the beveled edge of the
SIM/USIM card aligns with that of the card slot.
3.
Close the card slot cover.
(Optional) Installing the table stand
You can place the B68L on a flat surface such as a table or a desk, or hang it on a wall.
You can also use the table stand of the B68L to place it upright.
Insert the latches into the table stand slots on the bottom of the B68L.
Reset
Before removing the SIM/USIM card, ensure that the B68L is powered off and
disconnected from the power outlet.
The table stand is an optional accessory, and may not included in the packaging box.
If required, please contact your local dealer purchase it.
19216811.live