Page 6 / 12 Scroll up to view Page 1 - 5
6
(Optional) Installing the External Antenna
Connect the external antenna to the device's external antenna port. Install
the antenna securely by screwing it completely into the antenna jack.
You need to first set the antenna mode to external on the management page
(
). For details, see
Help
on the management page.
Note
:
z
If you do not need to connect an external antenna, you can skip this step.
z
The external antenna can be used indoor only.
z
While a data transfer is in progress, you are unable to switch between the
internal antenna and the external antenna.
Page 7 / 12
7
Connecting the Device to a PC Using an Ethernet
Cable
If the indicator for the LAN port to which the Ethernet cable is connected is
on, the connection is active. The network cable connecting to the PC must
not be longer than 100 meters (328 feet).
Connecting the Device to a USB Disk, Mobile Disk, or
USB Printer
Your device can be connected to a USB disk, mobile disk, or USB printer
through the USB port.
Attention:
The USB port provides only 500 mA of current.
Page 8 / 12
8
Connecting the Power Supply
Attention
: Use a power adapter that is compatible with the device or else
the device may be damaged.
Powering On/Off the Device
z
After connecting the power supply, the device will power on
automatically.
z
Press and hold
until all indicators turn off to power off the device.
z
Press and hold
until all indicators turn on to power on the device.
Setting Up Wireless Connection
Step 1. Activating Wi-Fi
z
After the device is powered on, Wi-Fi is activated by default.
z
Press and hold
for 2 seconds, and then stop the press. Then,
is off, which indicates that Wi-Fi is deactivated.
z
Press and hold
until
is steady on to activate Wi-Fi.
Page 9 / 12
9
Step 2. Establishing a Wi-Fi Connection
Establishing a Wi-Fi Connection (Using a PC as an Example)
Note:
Before establishing a Wi-Fi connection, you must ensure that your
computer is equipped with a wireless network adapter. If it is clear that the
computer has a wireless network connection, then the wireless network
adapter can be used. Otherwise, you must ensure that the wireless network
adapter is functioning properly.
1.
Make sure that
is steady on.
2.
View available wireless network connections on your PC.
3.
Connect to the wireless network connection consistent with your
device's SSID.
Note:
z
If the wireless network has security mechanism, you must enter the
correct network key.
z
The SSID and password are printed on the device label.
(Optional) Establishing a WPS Connection
If the Wi-Fi device to which your device connects supports WPS, a password
is generated automatically; there is no need to enter it. To set up the WPS
connection, do as follows:
1.
Make sure that
is steady on.
2.
Activate WPS on your device.
Note:
Press and hold
until
is blinking to activate WPS.
3.
Activate WPS on the client.
Note:
For details about operations on the client, see the user guide of the
client.
Page 10 / 12
10
Accessing the Internet
After a connection between your device and the client is active, you use the
following modes to access the Internet.
Attention
: Please select a proper Internet connection mode according to
your network charges. For example, if you are using time-based service,
Manual
mode is recommended. Please consult your network operator for
network charges.
Mode
Operation
Auto
After the device is powered up, no matter if there is data
transmission or not, it will be connected to the Internet,
and won't disconnect automatically.
Manual
z
Press and hold
until
is steady on. The
Internet connection is active.
z
After you are logged in to the management page, you
can connect or disconnect using your interface prompt.
On
Demand
After the device is powered up, and there is data
transmission, it will automatically connect to the Internet.
If there is no data transmission within the set time, the
device will automatically disconnect from the Internet.
Using the Management Page
You can set and manage the device parameters through the management
page.
1.
Launch a web browser and enter
in the address bar.
2.
Enter the password and click
Login
.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top