19216811.live11
Accessing the Internet
After a connection between your device and the client is set up, you can
access the Internet using the modes listed in the following table.
Select an appropriate mode according to your data service charging plan. For
example, if you are charged according to the length of time you are
connected to the Internet, it is recommended that you select manual mode.
For details about your data service charging plan, contact your service
provider.
Mode
Description
Auto
After being powered on, the device will automatically connect
to the Internet. Once connected, the device will not
automatically disconnect from the Internet.
Manual
Press and hold
until
turns steady green, which
indicates that you are connected to the Internet.
Log in to the web management page, and then connect to
or disconnect from the Internet as prompted.
On
Demand
After being powered on, if there is data being transferred, the
device will automatically connect to the Internet. If no data is
transferred within a pre-defined period, the device will
automatically disconnect from the Internet.
Using the Web Management Page
You can configure and manage the device settings using the web
management page.
1.
Launch a web browser, and enter
in the address bar.
2.
Enter the password, and log in to the web management page. The default
password is
admin
.
Note:
To protect your device, only one user can log in to the web
management page at a time.