Huawei B2268H Router Manual PDF (Setup & Configuration Guide)

Page 106 / 155 Scroll up to view Page 101 - 105

LTE TDD B2268H

User Guide

13 VoIP

Issue 01 (2014-01-15)

99

LABEL

DESCRIPTION

Enable

Device not forward calls to the phone line.

Do Not Disturb

Disable

This code is used to turn the Do Not Disturb feature off.

Apply

Click

Apply

to save your changes.

Cancel

Click

Cancel

to restore your previously saved settings.

13.3 The SIP Account Screen

The LTE Device uses a SIP account to make outgoing VoIP calls and check if an incoming call's

destination number matches your SIP account's SIP number. In order to make or receive a VoIP

call, you need to enable and configure a SIP account, and map it to a phone port. The SIP

account contains information that allows your LTE Device to connect to your VoIP service

provider.

See Section 16.3 for how to map a SIP account to a phone port. To access the following screen,

click

VoIP > SIP > SIP Account

.

Figure 13-2

VoIP > SIP > SIP Account

The following table describes the labels in this screen.

Table 13-2

VoIP > SIP > SIP Account

LABEL

DESCRIPTION

#

This is the index number of the entry.

Active

This shows whether the SIP account is activated or not.

A yellow bulb signifies that this SIP account is activated. A gray bulb

signifies that this SIP account is activated.

SIP Account

This shows the name of the SIP account.

SIP Service

Provider

This shows the name of the SIP service provider.

Account No.

This shows the SIP number.

Modify

Click the

Edit

icon to configure the SIP account.

Page 107 / 155

LTE TDD B2268H

User Guide

13 VoIP

Issue 01 (2014-01-15)

100

LABEL

DESCRIPTION

Click the

Delete

icon to delete this SIP account from the LTE Device.

13.3.1 Edit SIP Account

You can configure the SIP account. To access this screen, click

Edit

icon next to an existing

account.

Figure 13-3

SIP Account:Edit

Page 108 / 155

LTE TDD B2268H

User Guide

13 VoIP

Issue 01 (2014-01-15)

101

Each field is described in the following table.

Table 13-3

SIP Account: Edit

LABEL

DESCRIPTION

SIP Service Provider Selection

Service

Provider

Selection

Select the SIP service provider profile you want to use for the SIP account

you configure in this screen.

This field is view-only if you are editing the SIP account.

SIP Account Selection

SIP Account

Selection

This shows the SIP account you are configuring.

General

SIP Account

Select the

Active SIP Account

check box if you want to use this account.

Clear it if you do not want to use this account.

SIP Account

Number

Enter your SIP number. In the full SIP URI, this is the part before the @

symbol.

You can use up to 127 printable ASCII characters.

Authentication

Username

Enter the user name for registering this SIP account, exactly as it was given

to you. You can use up to 95 printable ASCII characters.

Password

Enter the password for registering this SIP account, exactly as it was given

to you. You can use up to 95 printable ASCII characters.

Page 109 / 155

LTE TDD B2268H

User Guide

13 VoIP

Issue 01 (2014-01-15)

102

LABEL

DESCRIPTION

URL Type

Select whether or not to include the SIP service domain name when the

LTE Device sends the SIP number.

SIP

- include the SIP service domain name.

TEL

- do not include the SIP service domain name.

Voice Features

Primary

Compression

Type

Secondary

Compression

Type

Third

Compression

Type

Select the type of voice coder/decoder (codec) that you want the LTE

Device to use. G.711 provides higher voice quality but requires more

bandwidth (64 kbps).

•

G.711MuLaw

is typically used in North America and Japan.

•

G.711ALaw

is typically used in Europe.

•

G.729

only requires 8 kbps.

Select the LTE Device's first choice for voice coder/decoder.

Select the LTE Device's second choice for voice coder/decoder. Select

None

if you only want the LTE Device to accept the first choice.

Select the LTE Device's third choice for voice coder/decoder. Select

None

if you only want the LTE Device to accept the first or second choice.

Speaking

Volume

Control

Enter the loudness that the LTE Device uses for speech that it sends to the

peer device.

Minimum

is the quietest, and

Maximum

is the loudest.

Listening

Volume

Control

Enter the loudness that the LTE Device uses for speech that it receives

from the peer device.

Minimum

is the quietest, and

Maximum

is the

loudest.

Active G.168

(Echo

Cancellation)

Select this if you want to eliminate the echo caused by the sound of your

voice reverberating in the telephone receiver while you talk.

Active VAD

(Voice Active

Detector)

Select this if the LTE Device should stop transmitting when you are not

speaking. This reduces the bandwidth the LTE Device uses.

Call Features

Send Caller ID

Select this if you want to send identification when you make VoIP phone

calls. Clear this if you do not want to send identification.

Active Call

Transfer

Select this to enable call transfer on the LTE Device. This allows you to

transfer an incoming call (that you have answered) to another phone.

Active Call

Waiting

Select this to enable call waiting on the LTE Device. This allows you to

place a call on hold while you answer another incoming call on the same

telephone (directory) number.

Active Call

Waiting Reject

Time

Specify a time of seconds that the LTE Device waits before rejecting the

second call if you do not answer it.

Active

Select this if you want the LTE Device to forward all incoming calls to the

Page 110 / 155

LTE TDD B2268H

User Guide

13 VoIP

Issue 01 (2014-01-15)

103

LABEL

DESCRIPTION

Unconditional

Forward

specified phone number.

Specify the phone number in the

To Number

field on the right.

Active Busy

Forward

Select this if you want the LTE Device to forward incoming calls to the

specified phone number if the phone port is busy.

Specify the phone number in the

To Number

field on the right.

If you have call waiting, the incoming call is forwarded to the specified

phone number if you reject or ignore the second incoming call.

Active No

Answer

Forward

Select this if you want the LTE Device to forward incoming calls to the

specified phone number if the call is unanswered. (See

No Answer Time

.)

Specify the phone number in the

To Number

field on the right.

No Answer

Ring Time

This field is used by the

Active No Answer Forward

feature.

Enter the number of seconds the LTE Device should wait for you to answer

an incoming call before it considers the call is unanswered.

Hot Line/

Warm Line

Enable

Warm Line

or

Hot Line

feature on the LTE Device. A hot line or

warm line number is a phone number.

Hot Line/

Warm Line

number

Enter the number to be dialed once the phone is off the hook immediately

(Hot Line) or after the time the phone remains off the hook has surpassed

the delay period (Warm Line).

Warm Line

Timer (sec)

Enter the duration the phone can remain off the hook before automatically

dialing the warm line number. You can set the delay from 1 to 15 seconds.

Active

Anonymous

Call Block

Select this if you do not want the phone to ring when someone tries to call

you with caller ID deactivated.

Apply

Click

Apply

to save your changes.

Back

Click

Back

to return to the previous screen without saving.

13.4 The Phone Region Screen

Use this screen to maintain settings that depend on which region of the world the LTE Device is

in. To access this screen, click

VoIP > Phone > Region

.

Figure 13-4

VoIP> Phone > Region

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share