1. Home
    2. /
  2. Manuals
    3. /
  3. Hitron
    4. /
  4. CGNM-3552-ROG
    5. /
  5. 20
Page 96 / 135 Scroll up to view Page 91 - 95
ADMIN
Version 2.0, 07/2015. Copyright
2015 Hitron Technologies
1
Hitron CGNM/ CGNM-3552 User’s Guide
6
Admin
This chapter describes the screens that display when you click
Admin
in the toolbar.
It contains the following sections:
Admin Overview
on page
1
The Management Screen
on page
2
The Remote Management Screen
on page
3
The Diagnostics Screen
on page
5
The Backup Screen
on page
6
The USB Storage Screen
on page
7
The Device Reset Screen
on page
8
6.1
Admin Overview
This section describes some of the concepts related to the
Admin
screens.
6.1.1
Debugging (Ping and Traceroute)
The CGNM/ CGNM-3552 provides a couple of tools to allow you to perform network
diagnostics on the LAN:
Page 97 / 135
ADMIN
Version 2.0, 07/2015. Copyright
2015 Hitron Technologies
2
Hitron CGNM/ CGNM-3552 User’s Guide
Ping: this tool allows you to enter an IP address and see if a computer (or other
network device) responds with that address on the network. The name comes
from the pulse that submarine SONAR emits when scanning for underwater
objects, since the process is rather similar. You can use this tool to see if an IP
address is in use, or to discover if a device (whose IP address you know) is
working properly.
Traceroute: this tool allows you to see the route taken by data packets to get
from the CGNM/ CGNM-3552 to the destination you specify. You can use this
tool to solve routing problems, or identify firewalls that may be blocking your
access to a computer or service.
6.2
The Management Screen
Use this screen to make changes to the CGNM/ CGNM-3552’s login credentials
(username and password).
NOTE:
If you forget your password, you will need to reset the CGNM/ CGNM-3552 to
its factory defaults.
Click
Admin
>
Management
. The following screen displays.
Figure 40:
The Admin: Management Screen
Page 98 / 135
ADMIN
Version 2.0, 07/2015. Copyright
2015 Hitron Technologies
3
Hitron CGNM/ CGNM-3552 User’s Guide
The following table describes the labels in this screen.
6.3
The Remote Management Screen
Use this screen to back up your CGNM/ CGNM-3552’s settings to your computer, to
load settings from a backup you created earlier, to reboot your CGNM/ CGNM-3552,
or to return it to its factory default settings.
Click
Admin
>
Remote Management
. The following screen displays.
Table 31:
The Admin: Management Screen
Username
If your CGNM/ CGNM-3552 supports multiple user
accounts, select the account you want to modify from
the list.
Old Password
Enter the password with which you currently log into the
CGNM/ CGNM-3552 for this account.
New Password
Enter and re-enter the password you want to use to log
into the CGNM/ CGNM-3552 for this account.
Confirm New Password
Idle Time
Use this to set your CGNM/ CGNM-3552’s idle time
Save Changes
Click this to save your changes to the fields in this
screen.
Cancel
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help
Click this to see information about the fields in this
screen.
Page 99 / 135
ADMIN
Version 2.0, 07/2015. Copyright
2015 Hitron Technologies
4
Hitron CGNM/ CGNM-3552 User’s Guide
Figure 41:
The Admin: Remote Management Screen
The following table describes the labels in this screen.
Table 32:
The Admin: Remote Management Screen
Remote Management
Protocol
Use this field to enable/disable remote control protocols
and ports on CGNM.
HyperText Transfer Protocol (
HTTP
)
HyperText Transfer Protocol Secure (
HTTPS
)
Telnet
ON/OFF
Use this field to enable/disable each protocol.
Port
Use this field to specify which port to use with each
protocol.
Remote IP Range
Remote Range Allow
All
This function allows you to grant access to a certain
range of IP addresses or all IP addresses.
IP Start
Use this field to enter the start IP.
IP End
Use this field to enter the end IP.
Action
Use this field to
Delete
a port forwarding rule. The deleted
rule’s information cannot be retrieved.
Save Changes
Click this to save your changes to the fields in this
screen.
Page 100 / 135
ADMIN
Version 2.0, 07/2015. Copyright
2015 Hitron Technologies
5
Hitron CGNM/ CGNM-3552 User’s Guide
6.4
The Diagnostics Screen
Use this screen to perform ping and traceroute tests on IP addresses or URLs.
Click
Admin
>
Diagnostics
. The following screen displays.
Figure 42:
The Admin: Diagnostics Screen
The following table describes the labels in this screen.
Cancel
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help
Click this to see information about the fields in this
screen.
Table 33:
The Admin: Diagnostics Screen
Destination (IP or
Domain)
Enter the IP address or URL that you want to test.
Ping
Select the type of test that you want to run on the
Destination
that you specified.
Traceroute
Table 32:
The Admin: Remote Management Screen (continued)

Rate

4.3 / 5 based on 3 votes.

Popular Hitron Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top