Page 86 / 135 Scroll up to view Page 81 - 85
WIRELESS
Version 2.0, 07/2015. Copyright
2015 Hitron Technologies
8
Hitron CGNM/ CGNM-3552 User’s Guide
Security Mode
Select the type of security that you want to use.
Select
Open
to use no security. Anyone in the
coverage area can enter your network.
Select
WEP
to use the Wired Equivalent Privacy
security protocol.
Select
WPA
to use the WiFi Protected Access
(Personal) security protocol.
Select
WPA2
to use the WiFi Protected Access 2
(Personal) security protocol.
Select
WPA/WPA2
to use both the WPA and the
WPA2 security protocols; clients that support WPA2
connect using this protocol, whereas those that
support only WPA connect using this protocol.
NOTE:
Due to inherent security vulnerabilities, it is
suggested that you use
WEP
only if it is the only
security protocol your wireless clients support.
Under almost all circumstances, you should use
one of the
WPA
options.
Auth Mode
Select the type of security authentication the device
should use.
Encryption Mode
Select the type of encryption you want to use. The
options that display depend on the
Security Mode
you
selected.
WEP
:
Select
WEP64
to use a ten-digit security key.
Select
WEP128
to use a twenty-six-digit security
key.
WPA
,
WPA2
and
WPA/WPA2
:
Select
TKIP
to use the Temporal Key Integrity
Protocol.
Select
AES
to use the Advanced Encryption
Standard.
Select
TKIP/AES
to allow clients using either
encryption type to connect to the CGNM/ CGNM-
3552.
Table 26:
The Wireless: Basic Settings Screen (2.4G) (continued)
Page 87 / 135
WIRELESS
Version 2.0, 07/2015. Copyright
2015 Hitron Technologies
9
Hitron CGNM/ CGNM-3552 User’s Guide
5.2.2
5G Settings
Use this screen to configure the CGNM/ CGNM-3552’s 5GHz wireless network.
Click
Wireless
>
Basic Settings
, then click the
5G
tab. The following screen
displays.
Pass Phrase
Enter the security key or password that you want to use
for your wireless network. You will need to enter this key
into your wireless clients in order to allow them to
connect to the network.
Save Changes
Click this to save your changes to the fields in this
screen.
Cancel
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help
Click this to see information about the fields in this
screen.
Table 26:
The Wireless: Basic Settings Screen (2.4G) (continued)
Page 88 / 135
WIRELESS
Version 2.0, 07/2015. Copyright
2015 Hitron Technologies
10
Hitron CGNM/ CGNM-3552 User’s Guide
Figure 36:
The Wireless: Basic Settings Screen (5G)
The following table describes the labels in this screen.
Table 27:
The Wireless: Basic Settings Screen (5G)
Basic Settings
Wireless Enabled
Use this field to turn the 5GHz wireless network on or
off.
Select
ON
to enable the wireless network.
Select
OFF
to disable the wireless network.
Page 89 / 135
WIRELESS
Version 2.0, 07/2015. Copyright
2015 Hitron Technologies
11
Hitron CGNM/ CGNM-3552 User’s Guide
Wireless Mode
Select the type of 5GHz wireless network that you want
to use:
802.11n 5g
: use IEEE 802.11n 5GHz.
NOTE:
At the time of writing IEEE 802.11n is the only
5GHz network type available.
NOTE:
Only wireless clients that support the network
protocol you select can connect to the wireless
network.
Channel Bandwidth
Select the 5GHz wireless channel bandwidth that you want
to use.
Wireless Channel
Select the 5GHz wireless channel that you want to use,
or select
Auto
to have the CGNM/ CGNM-3552 select
the optimum channel to use.
NOTE:
Use the
Auto
setting unless you have a specific
reason to do otherwise.
WPS Enabled
Use this field to turn WiFi Protected Setup (WPS) on or
off on the 5GHz network.
Select
ON
to enable WPS.
Deselect
OFF
to disable WPS.
Multiple SSID Settings
Multiple SSID
Click this to view settings for the main 5GHz SSID.
Network Name (SSID)
Enter the name that you want to use for this SSID. This
is the name that identifies your network, and to which
wireless clients connect.
NOTE:
It is suggested that you change the SSID from
its default, for security reasons.
Enable
Use this field to enable or disable the SSID.
Select
ON
to enable the SSID.
Deselect
OFF
to disable the SSID.
Table 27:
The Wireless: Basic Settings Screen (5G) (continued)
Page 90 / 135
WIRELESS
Version 2.0, 07/2015. Copyright
2015 Hitron Technologies
12
Hitron CGNM/ CGNM-3552 User’s Guide
Broadcast SSID
Use this field to make this SSID visible or invisible to
other wireless devices.
Select
ON
if you want your network name (SSID) to
be public. Anyone with a wireless device in the
coverage area can discover the SSID, and attempt
to connect to the network.
Select
OFF
if you do not want the CGNM/ CGNM-
3552 to broadcast the network name (SSID) to all
wireless devices in the coverage area. Anyone
who wants to connect to the network must know
the SSID.
WMM (QoS)
Use this field to apply WiFi MultiMedia (WMM) Quality of
Service (QoS) settings to this SSID.
Select
ON
to enable WMM QoS on this SSID.
Select
OFF
to disable WMM QoS on this SSID.
Security Mode
Select the type of security that you want to use.
Select
Open
to use no security. Anyone in the
coverage area can enter your network.
Select
WEP
to use the Wired Equivalent Privacy
security protocol.
Select
WPA
to use the WiFi Protected Access
(Personal) security protocol.
Select
WPA2
to use the WiFi Protected Access 2
(Personal) security protocol.
Select
WPA/WPA2
to use both the WPA and the
WPA2 security protocols; clients that support WPA2
connect using this protocol, whereas those that
support only WPA connect using this protocol.
NOTE:
Due to inherent security vulnerabilities, it is
suggested that you use
WEP
only if it is the only
security protocol your wireless clients support.
Under almost all circumstances, you should use
one of the
WPA
options.
Auth Mode
Select the type of security authentication the device
should use.
Table 27:
The Wireless: Basic Settings Screen (5G) (continued)

Rate

4.3 / 5 based on 3 votes.

Popular Hitron Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top