Hawking HWRN2 Router Manual PDF (Setup & Configuration Guide)

Page 126 / 136 Scroll up to view Page 121 - 125

117

Here are descriptions of every buttons:

Backup

Press ‘Save...’ button, and you’ll be prompted to

Settings (1):

download the configuration as a file, default filename is

‘default.bin’, you can please save it as another filename for

different versions, and keep it in a safe place.

Restore

Press ‘Browse…’ to pick a previously-saved

Settings (2):

configuration file from your computer, and then click

‘Upload’ to transfer the configuration file to router. After the

configuration is uploaded, the router’s configuration will be

replaced by the file you just uploaded.

Restore to

Click this button to remove all settings you made, and

Factory Default (3):

restore the configuration of this router back to factory

default settings.

1

2

3

Page 127 / 136

118

3-6 Firmware Upgrade

The system software used by this router is known as ‘firmware’, just like

any applications on your computer, when you replace the old application

with a new one; your computer will be equipped with new function. You

can also use this firmware upgrade function to add new functions to your

router, even fix the bugs of this router.

To upgrade firmware, please follow the instructions:

Please click ‘Admin’ tab located at the upper-right corner of web

management interface, then click ‘Firmware Upgrade’. The following

message will be displayed on your web browser:

Click ‘Browse’ button first, you’ll be prompted to provide the filename of

the firmware upgrade file. Please download the latest firmware file from

the Hawking Technologies website, and use it to upgrade your router.

After a firmware upgrade file is selected, click ‘Apply’ button, and the

router will start firmware upgrade procedure automatically. The

procedure may take several minutes, please be patient.

NOTE: Never interrupt the upgrade procedure by closing the web

browser or physically disconnect your computer from router. If the

firmware you uploaded is corrupt, the firmware upgrade will fail, and

you may have to return this router to the dealer of purchase to ask for

help. (Warranty is void if you interrupt the upgrade procedure).

Page 128 / 136

119

3-7 System Reset

If you think you network performance is bad, or you find the behavior of

the router is strange, you can perform a router reset. Sometimes it will

solve the problem.

To do so, please click ‘Admin’ tab located at the upper-right corner of

web management interface, then click ‘Reset’. The following message

will be displayed on your web browser:

Please click ‘Apply’ to reset your router, and it will be available again

after a few minutes, please be patient.

Page 129 / 136

120

Chapter IV: Appendix

4-1 Hardware Specification

Switch: IC+ IP175C (5 Port Switch)

Flash: 4MB

SDRAM: 16MB

WAN Port: 10/100M UTP Port x 1

LAN Ports: 10/100M UTP Port x 4

Antenna: 3dBi Dipole Antenna x 3 (2T3R Spatial Multiplexing MIMO

configuration. 2 antennas are for signal transmitting and 3 antennas are for

signal receiving)

Power: 12VDC, 1A Switching Power Adapter

Dimension: 30(H) x 187(W) x 100(D) mm

Transmit Power: 16dBm ± 1dBm

Temperature: 32~104

°

F (0 ~ 40

°

C)

Humidity: 10-90% (NonCondensing)

Certification: FCC, CE

Page 130 / 136

121

4-2 Troubleshooting

If you found the router is working improperly or stops responding to you,

don’t panic! Before you contact your dealer of purchase for help, please

read this troubleshooting first. Some problems can be solved by yourself

within very short time!

Scenario

Solution

Router is not

responding to me

when I want to access

it by web browser

a.

Please check the connection of power cords

and network cables of this router. All cords

and cables should be correctly and firmly

inserted into the router.

b.

If all LEDs on this router are off, please

check the status of A/C power adapter, and

make sure it’s correctly powered.

c.

You must use the same IP address section

which router uses.

d.

Are you using MAC or IP address filter?

Try to connect the router by another

computer and see if it works; if not, please

restore your router to factory default

settings (pressing ‘reset’ button for over 10

seconds).

e.

Set your computer to obtain an IP address

automatically (DHCP), and see if your

computer can get an IP address.

f.

If you did a firmware upgrade and this

happens, contact your dealer of purchase for

help.

g.

If all above solutions don’t work, contact

the dealer of purchase for help.

Can’t get connected to

Internet

a.

Go to ‘Status’ -> ‘Internet Connection’

menu, and check Internet connection status.

b.

Please be patient, sometimes Internet is just

that slow.

c.

If you connect a computer to Internet

directly before, try to do that again, and

check if you can get connected to Internet

Rate

Popular Hawking Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share