1. Home
    2. /
  2. Manuals
    3. /
  3. FRITZ
    4. /
  4. WLAN 7490
    5. /
  5. 36
Page 176 / 197 Scroll up to view Page 171 - 175
FRITZ!Box 7490
176
Uninstalling Supplementary Software
26.2
Uninstalling Supplementary Software
Additional software for the FRITZ!Box is available on the web
pages of AVM at
en.avm.de/service/downloads/?product=FRITZ%2521Box%
2B7490
.
If you have installed supplementary programs on one or more
computers, uninstall this software using the control panel of
your Windows operating system.
Uninstalling Programs in Windows 8.1 or 8
1.
Press the Windows key
and the X key at the same
time.
A menu is opened that contains all of the important
functions of Windows 8 and 8.1, respectively.
2.
Click on the “Programs and Features” entry.
The “Uninstall or change a program” list shows all of the
programs installed on your computer.
3.
Mark the AVM program you want to remove in the list.
4.
Click the “Uninstall” button.
The program will be removed.
Uninstalling Programs in Windows 7
1.
Open “Start / Control Panel / Programs”.
2.
Under “Programs and Features”, click “Uninstall a pro-
gram”.
3.
Mark the AVM program you want to remove in the list.
4.
Click the “Uninstall/Change” button.
The program will be removed.
Page 177 / 197
Uninstalling Supplementary Software
FRITZ!Box 7490
177
Uninstalling Programs in Windows Vista
1.
Open “Start / Settings / Control Panel / Programs and
Functions”.
2.
Mark the AVM program you want to remove in the list.
3.
Click the “Uninstall/Change” button and confirm with
“Continue”.
The program will be removed.
Uninstalling Programs in Windows XP
1.
Open “start / Control Panel / Add or Remove Programs”.
Make sure that the “Change or Remove Programs” but-
ton is selected in the column at left.
2.
Mark the AVM program you want to remove in the list of
“Currently installed” programs.
3.
Click the “Change/Remove” button.
The program will be removed.
Page 178 / 197
FRITZ!Box 7490
178
Technical Specifications
27
Technical Specifications
Facts worth knowing: Here you will find comprehensive technical data
on your FRITZ!Box 7490.
27.1
Ports and Interfaces
•
DSL/telephone port
–
VDSL/ADSL modem for use with
ADSL/ADSL2/ADSL2+ (also IP-based, Annex J) or
ITU G.992.1, ITU G.992.3, ITU G.992.5 (Annex B or J)
or VDSL2 (also IP-based) or ITU G.993.2
–
telephone port for connecting to the analog network
or ISDN
•
Two a/b ports with RJ11 sockets for connecting two ana-
log terminal devices
•
One ISDN S
0
NT port
S
0
bus with support for ISDN terminal devices; the CIP
services voice, telephony, audio 3.1 and fax G2/G3 are
supported
•
DECT base station
•
Four LAN ports via RJ45 sockets (standard Ethernet,
10/100/1000 Base-T)
•
Two USB host controllers (USB version 3.0/2.0)
•
Wireless access point with support for wireless LAN ra-
dio networks
–
IEEE 802.11a – 54 Mbit/s
–
IEEE 802.11b – 11 Mbit/s
–
IEEE 802.11g – 54 Mbit/s
–
IEEE 802.11n – 450 Mbit/s
–
IEEE 802.11ac – 1300 Mbit/s
Page 179 / 197
Router Functions
FRITZ!Box 7490
179
27.2
Router Functions
•
Router
•
DHCP server
•
Firewall with IP masquerading/NAT
•
IPv4 and IPv6
•
Parental control and filter lists
•
Port forwarding
•
Dynamic DNS
•
VPN
27.3
User Interface and Display
•
Configuration and status messages via a web browser on
a connected computer
•
Five LEDs indicate the condition of the device
27.4
Tones
•
Busy signal: 500 ms tone, 500 ms pause, +/– 20 ms
•
Ring tone: 1 s tone, 4 s pause +/– 100 ms
27.5
Device Properties
•
Dimensions (W x D x H): approx. 245 x 55 x 175 mm
•
FRITZ!OS can be updated
•
Conforms to CE standards
•
Ambient conditions
–
operating temperature: 0 °C – +40 °C
–
storage temperature: -20 °C – +70 °C
–
relative humidity (operation): 10% – 90%
–
relative humidity (idle): 5% – 95%
•
Supply voltage: 230 V / 50 Hz
Page 180 / 197
FRITZ!Box 7490
180
Cables
•
Maximum power consumption: 27 W
•
Average power consumption: 9.3 W
The average power consumption was determined at
room temperature (23 °C to 27 °C) with the following
load:
–
DSL connection active
–
wireless LAN on; no devices registered via wireless
LAN
–
DECT on; one telephone registered via DECT; no ac-
tive calls
–
one network device connected to a LAN port; no data
transfer; other LAN ports not in use
27.6
Cables
Network Cable (Yellow)
Illustration
Use
The network cable is used to connect computers and network devic-
es to the FRITZ!Box 7490.
•
AVM recommends using a network cable no more than
100 meters long.
•
Additional network cable is required if you would like to use all
of the FRITZ!Box 7490 network ports.
Extension

Rate

4.5 / 5 based on 2 votes.

Popular FRITZ Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top