FRITZ WLAN 7490 Router Manual PDF (Setup & Configuration Guide)

Page 171 / 197 Scroll up to view Page 166 - 170

Call Diversion

FRITZ!Box 7490

171

2.

Pick up the handset.

Wait for the second-long positive acknowledgment tone.

3.

Hang up the handset.

Disabling: Call Diversion for FON 1

1.

Press the keys

s401rss

on the telephone.

2.

Pick up the handset.

Wait for the second-long positive acknowledgment tone.

3.

Hang up the handset.

Enabling: Call Diversion for FON 2

1.

Press the following keys on the telephone:

2.

Pick up the handset.

Wait for the second-long positive acknowledgment tone.

3.

Hang up the handset.

delayed (after 20 seconds)

r421s

<destination num-

ber>

s

only when busy

r431s

<destination num-

ber>

s

immediately when busy, oth-

erwise delayed

r441s

<destination num-

ber>

s

Type of Call Diversion

Keys

immediately without ringing

r412s

<destination num-

ber>

s

immediately with ring

r452s

<destination num-

ber>

s

delayed (after 20 seconds)

r422s

<destination num-

ber>

s

only when busy

r432s

<destination num-

ber>

s

immediately when busy, oth-

erwise delayed

r442s

<destination num-

ber>

s

Type of Call Diversion

Keys

Page 172 / 197

FRITZ!Box 7490

172

Switching the Wireless Network On and Off

Disabling: Call Diversion for FON 2

1.

Press the keys

s402rss

on the telephone.

2.

Pick up the handset.

Wait for the second-long positive acknowledgment tone.

3.

Hang up the handset.

25.4

Switching the Wireless Network On and Off

1.

Press the following keys on the telephone:

2.

Pick up the handset and hang it up again.

25.5

Loading Factory Settings

1.

Press the keys

r991s15901590s

.

2.

Pick up the handset and hang it up again.

The factory settings are loaded. Then the FRITZ!Box will re-

start.

Function

Keys

Wireless LAN on

r96s1s

Wireless LAN off

r96s0s

All settings you made in the FRITZ!Box will be deleted.

Page 173 / 197

Disabling and Enabling Automatic Outside Dialing

FRITZ!Box 7490

173

25.6

Disabling and Enabling Automatic Outside Dialing

On the “FON 1” and “FON 2 lines you can enable and disable

automatic outside dialing. The default setting is “enabled”.

When automatic outside dialing is enabled, dial “**” before

internal numbers; when automatic outside dialing is dis-

abled, dial “0” before external numbers. Example:

Automatic Outside Dialing on FON 1

1.

Press the following keys on the telephone:

2.

Pick up the handset and hang it up again.

Automatic Outside Dialing on FON 2

1.

Press the following keys on the telephone:

2.

Pick up the handset and hang it up again.

Automatic Outside

Dialing Is

Call to the External

Telephone Number

2345

Call to the Internal

Number 2

Enabled

2345

ss2

Disabled

02345

2

Function

Keys

Disable Automatic Outside Dialing

r11s0s

Enable Automatic Outside Dialing

r11s1s

Function

Keys

Disable Automatic Outside Dialing

r12s0s

Enable Automatic Outside Dialing

r12s1s

Page 174 / 197

FRITZ!Box 7490

174

Taking FRITZ!Box Out of Operation

26

Taking FRITZ!Box Out of Operation

In this chapter you receive tips and recommendations for taking the

FRITZ!Box out of operation.

26.1

Loading Factory Settings

When the factory settings are restored to the FRITZ!Box, all of

the settings in the FRITZ!Box are restored to their condition

upon delivery. This way you can delete incorrect settings that

prevent the FRITZ!Box from functioning properly.

Resetting the FRITZ!Box has the following effects:

•

All settings you made in the FRITZ!Box will be deleted.

•

The internal memory of the FRITZ!Box will be deleted. Re-

ceived faxes and messages on the answering machine

will also be deleted.

•

The network key in the factory settings will be activated

again.

•

The IP configuration of the factory settings will be re-

stored.

You have the option of restoring the factory settings using the

FRITZ!Box user interface or a telephone connected with the

FRITZ!Box. The

page 174

section describes how to restore the

factory settings with the user interface. How to restore them

using a telephone is described in the

Loading Factory

Settings

on

page 172

section.

Preparing to Load Factory Settings

Before loading the factory settings of your FRITZ!Box, save

your settings and FRITZ!Box data. Work through the following

steps:

Restoring the factory settings is also recommended if you

would like to pass the FRITZ!Box to another user.

Page 175 / 197

Loading Factory Settings

FRITZ!Box 7490

175

Saving FRITZ!Box Settings

Before loading the factory settings, save all of the settings

you made in your FRITZ!Box to a backup file. With this backup

file you can restore your settings to the FRITZ!Box at any time

or load them to another FRITZ!Box. For more information on

this, see the

Saving and Restoring the FRITZ!Box Settings

from

page 40

section.

Saving Data from Internal Memory

1.

Open the FRITZ!Box user interface, see

page 32

.

2.

Select “FRITZ!NAS” in the menu of the FRITZ!Box.

The FRITZ!NAS interface is opened.

3.

Click here with the mouse to select the data you want to

save.

4.

Click the

“Copy FRITZ!NAS to My Device” icon in the

FRITZ!NAS toolbar and confirm by clicking “OK”.

The selected data are copied to a ZIP file in the down-

load order you specified.

This concludes the saving of your data from the internal mem-

ory of the FRITZ!Box.

Loading Factory Settings

1.

In the FRITZ!Box user interface, select the “System /

Backup” menu.

2.

Select the “Factory Settings” tab.

3.

Click the “Load Factory Settings” button.

The FRITZ!Box is reset to its factory settings. All settings made

during operation will be overwritten.

Before loading factory settings, we recommend saving the

settings configured on your FRITZ!Box in a backup file; see

page 40

.

Rate

Popular FRITZ Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share