Page 111 / 172
Scroll up to view Page 106 - 110
Making Telephone Calls with Convenience Functions
FRITZ!Box 6490 Cable
111
Transferring: Forwarding Calls Internally
Here is how to transfer a call to a different telephone:
1.
While you are conducting the call, press the Hold button
R
.
The call is on hold.
2.
Enter an internal number.
The internal numbers of the telephones you have con-
nected are listed in telephone book of the FRITZ!Box us-
er interface.
When the called party accepts the call the second call is
connected.
3.
Hang up to connect the two external parties with each
other.
Calling Line Identification Restriction (CLIR) Once for
FON 1 or FON 2
For outgoing calls on the lines “FON 1” and “FON 2” you can
restrict identification of your calling line once (for one call).
1.
Press the keys
s31r
on the telephone.
2.
Enter the telephone number you would like to call.
3.
Pick up the handset.
For this call your telephone number will not be transmitted to
the other caller.
Three-Party Conference Call
Making a three-party conference call
1.
Connect the first call: Call someone or pick up their call.
2.
Press the Hold button
R
.
Call 1 is on hold.
Page 112 / 172
FRITZ!Box 6490 Cable
112
Making Telephone Calls with Convenience Functions
3.
Connect the second call: Enter an internal or external
telephone number.
When the called party accepts the call the second call is
connected.
4.
Press the keys
R3
.
The three-party conference is set up.
Any party can hang up. The two other parties remain con-
nected.
Interrupting a Three-Party Conference Call
1.
Press the keys
R2
.
2.
You are speaking with party 1 and holding call 2.
3.
Press the following keys on the telephone:
Accepting or Rejecting Waiting Calls on FON 1 and FON 2
Requirements
•
The FRITZ!BoxCall waiting feature must be enabled for
the individual telephone in the “”. The telephone set-
tings can be edited in the user interface of the FRITZ!Box-
under “Telephony / Telephony Devices”.
Rejecting a Waiting Call
Press the keys
R0
.
Accepting a Waiting Call and Holding Call 1
1.
Press the keys
R2
.
2.
Press the following keys on the telephone:
Function
Keys
Ending call 2 and switching to
call 1
R1
Switching between call 1 and
call 2 (alternating)
R2
Making a three-party confer-
ence call
R3
Page 113 / 172
Making Telephone Calls with Convenience Functions
FRITZ!Box 6490 Cable
113
Accepting a Waiting Call and Ending Call 1
1.
Hang up.
Call 1 is ended and your telephone rings.
2.
Pick up the handset.
You are connected with the waiting caller.
Holding, Consultation and Alternating
You can put a call on hold in order to call another party and
establish a second call (consultation).
You can alternate between the two calls as often as you like.
Holding and Consultation
1.
While you are conducting the call, press the Hold button
R
on the telephone.
Call 1 is on hold.
2.
Enter an internal or external telephone number.
When the called party accepts the call the second call is
connected.
Alternating between calls
Here is how to switch from the active to the held call:
Press the keys
R2
.
The call that was just active is put on hold and you con-
tinue the other call.
Function
Keys
Switching between call 1 and
call 2 (alternating)
R2
Ending call 2 and switching to
call 1
R1
Page 114 / 172
FRITZ!Box 6490 Cable
114
Making Telephone Calls with Convenience Functions
Ending the Active Call—Continuing the Call on Hold
1.
Hang up the handset.
The active call is ended. Your telephone rings.
2.
Pick up the handset.
You are speaking with the party that was on hold.
Using Keypad Shortcuts
Keyboard shortcuts are commands consisting of multiple
characters and numerals. They can be used to control ser-
vices and features in the telephone network.
For information about which keypad sequences you can use,
contact your carrier.
1.
Press the keys
sr
< Seq>. <Seq> stands for a keyboard
sequence.
If the telephone is connected to the “FON 1” or “FON 2”
port and you have disabled automatic outside dialing
(see
page 153
), press
0sr
<Seq>.
2.
Pick up the handset.
Page 115 / 172
FRITZ!Box as a DECT Base Station
FRITZ!Box 6490 Cable
115
16
FRITZ!Box as a DECT Base Station
The FRITZ!Box is equipped with a DECT base station, on which you can
register and configure a total of up to six cordless telephones.
16.1
Paging Cordless Telephones
If you have misplaced a cordless telephone, you can find it by
using a paging call:
1.
Briefly press the “DECT” button of the FRITZ!Box. All
cordless telephones registered on the FRITZ!Box will
ring.
2.
To end the paging call press the “DECT” button on the
FRITZ!Box again, or any button on your cordless tele-
phone.
16.2
Registering a Cordless Telephone
Read
Registering FRITZ!Fon and Other Cordless (DECT)
Telephones
on
page 37
.
16.3
Deregistering a Cordless Telephone
Deregister from the FRITZ!Box the cordless telephones you no
longer use.
1.
Open the FRITZ!Box user interface; see
page 25
.
2.
Select “DECT”.
3.
To deregister a cordless telephone, click the “De-
lete”
button.
The cordless telephone will be deregistered from the
FRITZ!Box and deleted from the user interface.
19216811.live