Page 86 / 94
Scroll up to view Page 81 - 85
86
Remote managemen
t
This allows you to designate a host in the Internet the ability to configure the
Broadband router from a remote site. Enter the designated host IP Address in the
Host IP Address field.
Host Address:
This is the IP address of the host in the Internet that will have
management/configuration access to the Broadband router from
a remote site. If the Host Address is left 0.0.0.0 this means
anyone can access the router’s web-based configuration from a
remote location, providing they know the password.
Port:
The port number of the remote management web interface.
Enabled:
Check to enable the remote management function.
Click <
Apply
> at the bottom of the screen to save the above configurations.
Page 87 / 94
87
- Time
The Time Zone allows your router to reference or base its time on the settings
configured here, which will affect functions such as Event Log entries and
Schedule settings.
Time Setup:
Synchronize with the NTP server
Time Zone:
Select the time zone of the country you are currently in. The
router will set its time based on your selection.
NTP Time Server:
This accept local the IP Address of Local NTP Time
Server Address.
Daylight Savings:
The router can also take Daylight Savings into account.
If you wish to use this function, you must select the
Daylight Savings Time period and check/tick the enable
box to enable your daylight saving configuration.
Click <
Apply
> at the bottom of the screen to save the above configurations
Page 88 / 94
88
Synchronize with PC
You could synchronize timer with your Local PC time.
PC Date and Time:
This field would display the PC date and time.
Daylight Savings:
The router can also take Daylight Savings into account. If you
wish to use this function, you must select the Daylight Savings
Time period and check/tick the enable box to enable your
daylight saving configuration.
Click
<Apply>
at the bottom of the screen to save the above configurations.
Page 89 / 94
89
- Power
Saving power in WLAN mode can be enabled / disabled in this page.
- Diagnosis
This page could let you diagnosis your current network status.
Page 90 / 94
90
- Firmware
This page allows you to upgrade the router’s firmware. To upgrade the firmware
of your Broadband router, you need to download the firmware file to your local hard
disk, and enter that file name and path in the appropriate field on this page. You can
also use the Browse button to find the firmware file on your PC.
Once you’ve selected the new firmware file, click <
Apply
> at the bottom of the
screen to start the upgrade process
19216811.live