Page 81 / 94
Scroll up to view Page 76 - 80
81
- Monitor
Show the network packets histogram for network connection on WAN, LAN &
WLAN. Auto refresh keeps information updated frequently.
- Language
This Wireless Router support multiple language of web pages, you could select
your native language here.
Page 82 / 94
82
±
Wireless
-Basic
You can set parameters that are used for the wireless stations to connect to this
router. The parameters include Mode, ESSID, Channel Number and Associated
Client.
Radio:
Enable or Disable Wireless function
Band:
Allows you to set the AP fixed at 802.11b, 802.11g or 802.11n mode. You
can also select B+G mode to allow 802.11b and 802.11g clients at the
same time.
Enable ESSID:
You can specify the maximum ESSID number.
ESSID1~3:
Allow you to specify ESSID of WLAN.
Page 83 / 94
83
Site Survey:
You can scan the current Wireless Access Point and connect on it.
-Client List
This WLAN Client Table shows the Wireless client associate to this Wireless
Router.
Page 84 / 94
84
-Policy
The Broadband router can allow you to set up the Wireless Access Policy.
Communication between Wireless clients:
Allow Wireless Client to communicate with other Wireless Client on specific SSID.
Communication between Wireless clients and wired clients:
Allow Wireless Client to communicate with other Wireless Client on specific
SSID and Wired Client on the switch.
Page 85 / 94
85
±
Tools
- Admin
You can change the password required to log into the broadband router's
system web-based management. By default, the password is: admin. Passwords
can contain 0 to 12 alphanumeric characters, and are case sensitive.
Old Password:
Fill in the current password to allow changing to a new password.
New Password:
Enter your new password and in
Repeat New Password
for
verification purposes
Click
<Apply>
at the bottom of the screen to save the above configurations
19216811.live