Page 71 / 94
Scroll up to view Page 66 - 70
71
Synchronize with PC
You could synchronize timer with your Local PC time.
PC Date and Time:
This field would display the PC date and time.
Daylight Savings:
The router can also take Daylight Savings into account. If you
wish to use this function, you must select the Daylight
Savings Time period and check/tick the enable box to enable
your daylight saving configuration.
Click
<Apply>
at the bottom of the screen to save the above configurations.
Page 72 / 94
72
- DDNS
DDNS allows you to map the static domain name to a dynamic IP address.
You must get an account, password and your static domain name from the
DDNS service providers. This router supports DynDNS, TZO and other common
DDNS service providers.
Enable/Disable DDNS:
Enable or disable the DDNS function of this router
Server Address:
Select a DDNS service provider
Host
Name:
Fill in your static domain name that uses DDNS.
Username:
The account that your DDNS service provider assigned to you.
Password:
The password you set for the DDNS service account above
Click
<Apply>
at the bottom of the screen to save the above configurations.
Page 73 / 94
73
- Power
Saving power in WLAN mode can be enabled / disabled in this page.
- Diagnosis
This page could let you diagnosis your current network status.
Page 74 / 94
74
- Firmware
This page allows you to upgrade the router’s firmware. To upgrade the
firmware of your Broadband router, you need to download the firmware file to
your local hard disk, and enter that file name and path in the appropriate field on
this page. You can also use the Browse button to find the firmware file on your
PC.
Once you’ve selected the new firmware file, click <
Apply
> at the bottom of the
screen to start the upgrade process
Page 75 / 94
75
- Back-up
This page allows you to save the current router configurations. When you save the
configurations, you also can re-load the saved configurations into the router through
the
Restore Settings
. If extreme problems occur you can use the
Restore to
Factory Defaults
to set all configurations to its original default settings.
Backup Settings:
This can save the Broadband router current configuration to a
file named "
config.bin
" on your PC. You can also use the
<Upload>
button to restore the saved configuration to the
Broadband router. Alternatively, you can use the "
Restore to
Factory Defaults
" tool to force the Broadband router to
perform a power reset and restore the original factory settings.
19216811.live