Page 26 / 94
Scroll up to view Page 21 - 25
26
- LAN
The LAN Tabs reveals LAN settings which can be altered at will. If you are an
entry level user, try accessing a website from your browser. If you can access
website without a glitch, just do not change any of these settings.
Click
<Apply>
at the bottom of this screen to save the changed configurations.
LAN IP
IP address:
192.168.0.1. It is the router’s LAN IP address (the “Default Gateway”
IP address of your LAN clients). It can be changed based on your
own choice.
IP Subnet Mask:
255.255.255.0 Specify a Subnet Mask for your LAN segment.
802.1d Spanning Tree:
This is disabled by default. If 802.1d Spanning Tree
function is enabled, this router will use the spanning
tree protocol to prevent network loops.
Downloaded from
www.Manualslib.com
manuals search engine
Page 27 / 94
27
DHCP Server
DHCP Server:
This can enable or disable the Dynamic Pool setting.
Lease time:
This is the lease time of each assigned IP address.
Start IP:
This is the beginning of the IP pool for DHCP client hosts.
End IP:
. This is the end of the IP pool for DHCP client hosts
Domain name:
The Domain Name for the existing or customized network.
- DHCP
View the current LAN clients which are assigned with an IP Address by the
DHCP-server.
This page shows all DHCP clients (LAN PCs) currently connected to
your network. The table shows the assigned IP address, MAC address and
expiration time for each DHCP leased client. Use the
<Refresh>
button to update
the available information. Hit
<Refresh>
to get the updated table.
You can check “
Enable Static DHCP IP
“. It is possible to add more static
DHCP IPs. They are listed in the table “
Current Static DHCP Table
“. IP address
can be deleted at will.
Click
<Apply>
button to save the changed configuration.
Downloaded from
www.Manualslib.com
manuals search engine
Page 28 / 94
28
- Schedule
This page allows users to set up schedule function for Firewall and Power
Saving
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 29 / 94
29
Edit schedule options to allow configuration of firewall and power savings
services. Fill in the schedule and select type of service. Click <
Apply
> to keep the
settings.
Downloaded from
www.Manualslib.com
manuals search engine
Page 30 / 94
30
The schedule table lists the pre-schedule service-runs. You can select any of the
schedule record using the check box.
- Event Log
View
operation
event
log
. This page shows the current system log of the
Broadband router. It displays any event occurred after system start up. At the
bottom of the page, the system log can be saved
<Save>
to a local file for further
processing or the system log can be cleared
<Clear>
or it can be refreshed
<Refresh>
to get the most updated information. When the system is powered
down, the system log will be cleared if not saved to a local file.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live