Page 21 / 94
Scroll up to view Page 16 - 20
21
Enter the name for your wireless network (SSID) and security key
Click
<Next>
to proceed
To apply the entire configuration, click
<Reboot>
.
NOTE:
After Wireless settings are applied, you need to connect from your
WLAN client with the security settings you just finished configuring.
Remember the type of security & security key.
Downloaded from
www.Manualslib.com
manuals search engine
Page 22 / 94
22
11 Initial Setup ESR-9753
ESR-9753 uses web-interface for configuration to be accessed through your
web browser, such as Internet Explorer or Firefox.
- LOGIN Procedure
1.
OPEN your browser (e.g. Internet Explorer).
2. Type
in address bar and hit [Enter] button on your
keyboard.
Downloaded from
www.Manualslib.com
manuals search engine
Page 23 / 94
23
3. Click
<OK>
to navigate into ESR-9753 configuration home page.
4.
You will see the home page of ESR-9753 as follows.
Downloaded from
www.Manualslib.com
manuals search engine
Page 24 / 94
24
12
AP Router Mode
±
System
- Status
This page allows you to monitor the current status of your router.
System:
You can see the Uptime, hardware information, serial number as well
as firmware version information.
WAN Settings:
This section displays whether the WAN port is connected to a
Cable/DSL connection. It also displays the router’s WAN IP
address, Subnet Mask, ISP Gateway, MAC address and the
Primary DNS.
Downloaded from
www.Manualslib.com
manuals search engine
Page 25 / 94
25
LAN Settings:
This section displays the Broadband router LAN port’s current
information. It also shows whether the DHCP Server function is
enabled / disabled.
WLAN Settings:
This section displays the current WLAN configuration settings.
Wireless configuration details such as SSID, Security
settings, BSSID, Channel number and mode of operation are
briefly shown.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live