Page 26 / 108
Scroll up to view Page 21 - 25
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
26
To save configuration changes click
NOTE:
After the Wireless settings are saved and the ENHWI-2AN3 is rebooted, you
need to reconnect your WLAN client using the new security settings you just
changed. You will need to reenter the new wireless security key for the client
and the ENHWI-2AN3 reestablish wireless connections.
XI – How to login to the ENHWI-2AN3 Web
Based Graphical User Interface
The ENHWI-2AN3 use a web based user interface for setting up your router’s
configuration, it can be access through your web browser such as Internet
Explorer or Mozilla Firefox.
ENHWI-2AN3 web based user interface login procedure
1.
OPEN your browser (Example: Internet Explorer, Mozilla, Netscape, etc).
Page 27 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
27
2. Type-in
exactly in address field and hit the
[Enter]
key on
your keyboard.
3.
Type-in the ENHWI-2AN3 Username and Password (the factory default is
admin and admin)
4. Click
to navigate into the ENHWI-2AN3 configuration home page.
5.
You will see the configuration home page of the ENHWI-2AN3 as follows.
Page 28 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
28
ENHW-2AN3 Home Page Screen
XII -
The AP Router Mode
SYSTEM
System:
Shows the Uptime, Hardware information, Serial number as well as the Firmware
version information and other vital information
•
Status Tab
This page allows you to monitor the status of your router.
Page 29 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
29
1.
WAN Settings
:
Scroll down to see the full information. This section displays whether the WAN port is
connected to a Cable / DSL modem. It also displays the router’s WAN IP address,
Subnet Mask, ISP Gateway, MAC address and the Primary DNS.
Page 30 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
30
2.
LAN Settings:
Scroll down to see this section, displays the ENHWI-2AN3 Router’s LAN ports
current information. It also shows whether the DHCP Server is enabled or disabled.
3. WLAN Settings:
Scroll down to see this section. This section displays the
current WLAN configuration settings. The wireless configuration details such as
the SSID, Security settings, ESSID, BSSID, Channel number and wireless
clients connected info are briefly shown.
•
LAN Tab
19216811.live