ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
12
•
Microsoft Windows compatible PC/Notebook with UPnP enabled Network
Interface Card adapter. (This can be found in your network cards advanced
properties within MS Windows) Optional, this is if you prefer to use the UPnP
feature.
•
CAT 5 or better network Ethernet cable(s), RJ-45 connector** for
PC/Notebook connections.
(** RJ-45 looks like a telephone cable connector
but bigger)
Step 1:
Connect the ENHWI-2AN3 “WAN Port” & your Cable or DSL Modem’s
LAN port using the provided Ethernet / RJ-45 patch cable.
Step 2:
Connect any of the four available LAN ports to your PC or Notebooks RJ-45
network interface card port using an Ethernet network cable (not provided).
Step 3:
Power-on the ENHWI-2AN3 unit. The red power LED in the front the panel
should light up & stay on to indicate that the router is ready.
Step 4:
Bring up the Smart Wizard. The “Smart Wizard” is a user friendly step-by-
step instruction to initially help you in setting up your router connecting your
computer(s) to the internet and to help you install administrator’s user ID and
password, setup the wireless security to protect your router and your LAN computers
from hackers and other type of intrusions. Insert the ENHWI-2AN3 Setup Disc CD
into your CDROM drive. An Encore logo will popup in a few seconds then will
disappear then immediately followed by the menu screen. Click on the “Setup
Wizard” icon to start the “SMART WIZARD”. (Refer to the graphical instruction
below this section)
If in case after you have inserted the CD onto your CDROM drive and nothing
happens or there is no Welcome screen came up, open your computer’s Windows
Explorer or browse the CD contents, go to the root directory and look for the file
Setup.exe
, double click it to start the Smart Wizard.
19216811.live