Page 11 / 131
Scroll up to view Page 6 - 10
10
1-3 System Requirements
z
Internet connection, provided by xDSL or cable modem with a RJ-45
Ethernet port.
z
Computer or network devices with wired or wireless network interface
card.
z
Web browser (
Microsoft Internet Explorer 4.0 or above, Netscape
Navigator 4.7 or above, Opera web browser, or Safari web browser).
z
An available DC power socket (100 – 240V, 50/60Hz)
Page 12 / 131
11
1-4 Package Contents
Before you starting to use this router, please check if there’s anything missing
in the package, and contact your dealer of purchase to claim for missing
items:
□
Broadband router (main body, 1 pcs)……………………………
1
□
Quick installation guide (1 pcs) …………………………………
2
□
User manual CDROM (1 pcs) …………………………………..
3
□
D/C power adapter (1 pcs) ……………………………………
.....
4
□
3dBi Antenna
(3 pcs)…….…………………………………
.....
5
□
Holding Base (1 pcs) ………………………………………
.....
6
Page 13 / 131
12
1-5 Familiar with your new wireless broadband router
Front Panel
LED Name
Light Status
Description
PWR
ON
Router is switched on and correctly powered
On
Wireless network is switched on or WPS
mode is on.
Off
Wireless network is switched off
WLAN
Flashing
Wireless LAN activity (transferring data).
On
WAN port (Internet) is running at 100Mbps
Off
WAN port (Internet) is running at
10Mbps
WAN
10/100M
Flashing
WAN activity (transferring data)
On
WAN port is connected
Off
WAN port is not connected
WAN
LNK/ACT
Flashing
WAN activity (transferring data)
On
LAN port is running at 100Mbps
LAN
10/100M
Off
LAN port is running at 10Mbps
On
LAN port is connected
Off
LAN port is not connected
LAN
LNK/ACT
Flashing
LAN activity (transferring data)
Page 14 / 131
13
Back Panel
Item Name
Description
Antenna A to C
Antenna A, B, and C
Power
Power connector, connects to D/C power adapter
Reset / WPS
Reset the router to factory default settings (clear all settings) or
start WPS function. Press this button and hold for 20 seconds to
clear all settings, and press this button for less than 20 seconds to
start WPS function.
1 - 4
Local Area Network (LAN) ports 1 to 4
WAN
Wide Area Network (WAN / Internet) port
Antenna A
Antenna B
Antenna C
Page 15 / 131
14
Chapter II: System and Network Setup
2-1 Build network connection
Please follow the following instruction to build the network connection
between your new WIRELESS router and your computers, network devices:
1.
Connect your xDSL / cable modem to the WAN port of router by Ethernet
cable.
2.
Connect all your computers, network devices (network-enabled consumer
devices other than computers, like game console, or switch / hub) to the
LAN port of the router.
3.
Connect the D/C power adapter to the wall socket, and then connect it to
the ‘Power’ socket of the router.
4.
Please check all LEDs on the front panel. ‘PWR’ LED should be steadily
on, WAN and LAN LEDs should be on if the computer / network device
connected to the respective port of the router is powered on and correctly
connected. If PWD LED is not on, or any LED you expected is not on, please
recheck the cabling, or jump to
‘4-2 Troubleshooting’
for possible reasons
and solution.
19216811.live