Page 21 / 74
Scroll up to view Page 16 - 20
21
III.
SETTING UP
III-1. iQ Setup
iQ Setup is a simple and intelligent WAN detection tool. Please follow the
instructions below.
1.
Use a Wi-Fi device (e.g. computer, tablet, smartphone) to search for a Wi-Fi
network with the SSID “edimax.setup” and connect to it.
2.
Open a web browser and if you do not automatically arriv
e at the “Get
Started” screen shown below, enter the URL
http://edimax.setup
. Select
your language from the drop down menu and click
“Get Started”
to begin
the setup process.
Page 22 / 74
22
Note:
If you cannot access http://edimax.setup , please
make sure your computer is set to use a dynamic IP
address. See II. NETWORK SETTINGS
3.
Ensure that your router is properly connected to your modem as shown on
the screen, and click
“Next”
to continue.
Page 23 / 74
23
4.
Please wait a moment while the BR-6478AC detects your WAN connection
type.
5.
The BR-6478AC will display the next screen depending on your WAN
connection type.
For
Dynamic IP
users please click
“Next”
to continue:
Page 24 / 74
24
For
PPPoE
users please enter the username and password provided by
your ISP and click
“Next”
to continue:
For
other
users please select your WAN connection type manually
from the drop down menu, click
“Next”
to continue and follow the
on-screen instructions.
Note:
If you are not sure which WAN connection type
to choose, please contact your ISP.
Page 25 / 74
25
6.
Please enter a network name (SSID) and Wi-Fi Password for each of the
BR-
6478AC’s 2.4GHz and 5GHz Wi
-Fi networks and click
“Next”
to
continue.
Note:
Please remember these details. For your
convenience, you can write them down at the end of
this QIG in “Wi
-
Fi Settings”.
7.
You will see the screen below, displaying a summary of your W-Fi settings
and that configuration is now complete. Please click
“Next”
to continue.
19216811.live