Page 31 / 74
Scroll up to view Page 26 - 30
31
IV-3-1-1.
Dynamic IP
Host Name
Input the host name of your computer (only required if
your ISP instructs you to do so).
MAC Address
If your ISP only permits computers with certain MAC
addresses to access the internet, input the MAC
address of your computer here. If your computer is
connected to internet via cable modem,
click “Clone
Mac address”
to enter the MAC address automatically.
DNS address
Select “
Obtain an IP address automatically
” or “Use
the
followin
g IP address”
. If you choose
“Use the following
IP address”
,
you will need to complete the “DNS1
Address”, “DNS2 Address” and “DNS3 Address” fields
below.
DNS1
Input the address of DNS1 assigned by your ISP.
DNS2
Input the address of DNS2 assigned by your ISP.
DNS3
Input the address of DNS3 assigned by your ISP.
MTU
Input the MTU (maximum transmission unit) value of
your network connection. The default value, which is
typical for a dynamic IP or static IP, is 1500.
TTL
Enable
the “TTL” function if your ISP
requires you to do
so.
Page 32 / 74
32
Most Dynamic IPs assigned to users by ISPs are configuration free
IV-3-1-2.
Static IP
IP Address
Input the static IP address assigned by your ISP.
Subnet Mask
Input the subnet mask assigned by your ISP.
Default Gateway Address
Input the default gateway address assigned by
your ISP.
MAC Address
If your ISP only permits computers with
certain MAC addresses to access the internet,
input the MAC address of your computer here.
If your computer is connected to internet via
cable modem,
click “Clone Mac address”
to
enter the MAC address automatically.
DNS1
Input the address of DNS1 assigned by your
ISP.
DNS2
Input the address of DNS2 assigned by your
ISP.
DNS3
Input the address of DNS3 assigned by your
ISP.
MTU
Input the MTU (maximum transmission unit)
Page 33 / 74
33
value of your network connection. The default
value, which is typical for a dynamic IP or static
IP, is 1500.
TTL
Enable
the “TTL” function if your ISP requires
you to do so.
IV-3-1-3.
PPPoE
User Name
Enter the user name assigned by your ISP.
Password
Enter the password assigned by your ISP.
MAC Address
If your ISP only permits computers with certain MAC
addresses to access the internet, input the MAC
address of your computer here. If your computer is
connected to internet via cable modem,
click “Clone
Mac address”
to enter the MAC address automatically.
Page 34 / 74
34
DNS address
Select “
Obtain an IP address automatically
” or “Use
the
following IP address”
. If you choose
“Use the following
IP address”
,
you will need to complete the “DNS1
Addres
s”, “DNS2 Address” and “DNS3 Address” fields
below.
DNS1
Input the address of DNS1 assigned by your ISP.
DNS2
Input the address of DNS2 assigned by your ISP.
DNS3
Input the address of DNS3 assigned by your ISP.
TTL
Enable
the “TTL” function if your ISP req
uires you to do
so.
Service Name
Input the Service Name assigned by your ISP.
MTU
Input the MTU (maximum transmission unit) value of
your network connection. The default value is 1392.
Typical values for ADSL are 1392 or 1492.
Connection Type
Select connection type from:
“Continuous”
–
always connected.
“Connect on Demand” –
connect when required.
“Manual”
–
connect and disconnect manually.
Idle Time Out
For
”Connect on Demand” connection type, specify the
length of inactivity required to disconnect.
Enable Dual Wan Access
If your ISP provides a dual-
WAN service, then check the box “Enable Dual Wan
Access” and enter the required information.
IV-3-1-4.
PPTP/L2TP
Fields for PPTP and L2TP connections are the same
–
PPTP is used as an
example below.
Page 35 / 74
35
Obtain an IP address automatically:
Host Name
Input the host name of your computer (only required if
your ISP instructs you to do so).
MAC Address
If your ISP only permits computers with certain MAC
19216811.live