Page 6 / 74 Scroll up to view Page 1 - 5
6
I-2.
Hardware
Item Name
Description
Antenna
Connects the supplied 3dBi antennas.
Radio ON/OFF Switch
Switch the wireless signal on/off accordingly.
Reset / WPS Button
Resets
the router to factory default settings (clears all
settings)
or
starts the
WPS
function.
Reset:
Press and hold for 12 seconds to restore all
settings to factory defaults.
WPS:
Press this button for 2
5 seconds to activate
the WPS function.
Gigabit LAN Ports
Connects via Ethernet cable to a computer or other
network devices.
Gigabit WAN Port
Connects to cable/xDSL modems.
5V Power Port
Connects to the supplied power adapter.
I-3.
LED Status
Page 7 / 74
7
LED
LED Status
Description
Power
On
Router is on.
Off
Router is off.
Internet
On
Internet connection is active.
Flashing
Router is connecting to internet.
Off
No internet connection.
2.4 GHz
On
2.4GHz wireless is active.
Flashing
2.4GHz LAN activity
(transferring/receiving data).
Off
2.4GHz wireless is not active.
5 GHz
On
5GHz wireless is active.
Flashing
5GHz LAN activity
(transferring/receiving data).
Off
5GHz wireless is not active.
WAN
On
WAN port connected.
Flashing
WAN activity
(transferring/receiving data)
Off
WAN port not connected.
LAN 1
4
On
LAN port connected.
Flashing
LAN activity (transferring or
receiving data).
Off
LAN port not connected.
Page 8 / 74
8
I-4.
Safety Information
In order to ensure the safe operation of the device and its users, please read
and act in accordance with the following safety instructions.
1. The router is designed for indoor use only; do not place the router
outdoors.
2. Do not place the router in or near hot/humid places, such as a kitchen or
bathroom.
3. Do not pull any connected cable with force; carefully disconnect it from the
router.
4. The device contains small parts which are a danger to small children under
3 years old. Please keep the router out of reach of children.
5. Do not place the router on paper, cloth, or other flammable materials. The
router will become hot during use.
6. There are no user-serviceable parts inside the router. If you experience
problems with the router, please contact your dealer of purchase and ask
for help.
7. The router is an electrical device and as such, if it becomes wet for any
reason, do not attempt to touch it without switching the power supply off.
Contact an experienced electrical technician for further help.
8. If you smell burning or see smoke coming from the router then unplug the
router immediately, as far as it is safely possible to do so. Call your dealer of
purchase for help.
I-5.
Features
Supports IEEE 802.11ac & IEEE 802.11a/b/g/n concurrent dual-band
connections on 2.4GHz and 5GHz bands.
Wireless data transmission rate up to 1167Mbps (2.4GHz 300Mbps + 5GHz
867Mbps).
4 gigabit LAN ports (data transmission rates up to 1000Mbps).
Comply with IEEE 802.3/ 802.3u/ 802.3ab standards.
Smart and automated iQ Setup.
iQoS for quick and easy bandwidth management.
Build-in hardware button to enable/disable the wireless signal.
Wireless signal on/off scheduling function.
Supports DHCP, Static IP, PPPoE, PPTP, L2TP and WISP connection modes.
Page 9 / 74
9
Supports WMM, WEP, WPA, WPA2, DDNS, QoS, IP/MAC filter, DMZ and
virtual server.
II.
HARDWARE INSTALLATION & NETWORK SETTINGS
II-1.
Hardware Installation
Please setup your router, computer, modem and other network devices as
shown below.
Before using the BR-6478AC, please make sure your computer is set to use a
dynamic IP address
. This means your computer can obtain an IP address
automatically from a DHCP server. Please refer to instructions appropriate for
your operating system.
II-2.
Network Settings
II-2-1.
Windows XP
1.
Click the “Start” button, then click “Control Panel”.
Page 10 / 74
10
2.
Double click the “Network Connections” icon and the “Network
Connections” wi
ndow will appear.
3.
Right click “Local Area Connection” on the mouse. When the “Local Area
Connection Properties” window appears, click “Properties”.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top