Page 6 / 139
Scroll up to view Page 1 - 5
2
I
‐
2. LED Status
LED
LED Status
Description
PWR
On
Device is on.
Off
Device is off.
WLAN
On
Wi
‐
Fi is active (or WPS is active).
Flashing
Wi
‐
Fi activity (transferring data).
Off
Wi
‐
Fi is not active.
WAN
On
WAN port connected.
Flashing
WAN activity.
Off
WAN port not connected.
LAN (1–4)
On
Ethernet port is connected to a network
device.
Flashing
LAN activity.
Off
Ethernet port is not connected to a
network device.
Page 8 / 139
4
I
‐
4. Safety Information
In order to ensure the safe operation of the device and its users, please read
and act in accordance with the following safety instructions.
1. The device is designed for indoor use only; do not place it outdoors.
2. Do not place the device in or near hot/humid places, such as a kitchen or
bathroom.
3. Do not pull any connected cable with force; carefully disconnect it from the
BR
‐
6228nS V2/nC V2.
4. Handle the device with care. Accidental damage will void the warranty of
the device.
5. The device contains small parts which are a danger to small children under
3 years old. Please keep the device out of reach of children.
6. Do not place the device on paper, cloth, or other flammable materials. The
device may become hot during use.
7. There are no user
‐
serviceable parts inside the device. If you experience
problems with the device, please contact your dealer of purchase and ask
for help.
8. The device is an electrical device and as such, if it becomes wet for any
reason, do not attempt to touch it without switching the power supply off.
Contact an experienced electrical technician for further help.
Page 9 / 139
5
II.
Installation
1.
Plug the included power adapter into the device’s 5V DC power port and
the other end into an electrical socket.
2.
Ensure that the power LED is lit. If not, the device is not properly
connected.
3.
Use a Wi
‐
Fi device (e.g. computer, tablet, smartphone) to search for a Wi
‐
Fi
network with the SSID “edimax.setup” and connect to it.
iOS 4 or Android 4 and above are required for setup on a
smartphone or tablet.
4.
Open a web browser and if you do not automatically arrive at the “Get
Started” screen shown below, enter the URL
http://edimax.setup
and click
“Get Started”
to begin the setup process.
Page 10 / 139
6
If you cannot access
http://edimax.setup
, please make sure your
computer is set to use a dynamic IP address. Refer to
IV
‐
1.
Configuring your IP address
for more information.
5.
Select the mode for your BR
‐
6228nS V2/nC V2 and click
“Next”
to continue.
Wi
‐
Fi Router
The device connects to your modem and
enables Internet (wireless and Ethernet)
access on your network devices.
Access Point
The device connects to an existing router via
Ethernet cable and
provides Internet (wireless
19216811.live