Page 36 / 139 Scroll up to view Page 31 - 35
32
Fixed IP Address
Input the IP address assigned by your ISP
here.
Subnet Mask
Input the subnet mask assigned by your ISP
here.
Default Gateway
Address
Input the default gateway assigned by your
ISP here. Some ISPs may call this “Default
Route”.
MAC Address
For some applications, you may need to
designate a specific MAC address for the
router. Please enter the MAC address here. If
you are connecting the router to a computer,
press “Clone Mac” to automatically enter
your computer’s MAC address.
DNS Address 1, 2 &
3
Enter the DNS address(es) assigned by your
ISP here.
MTU
Enter the maximum transmission unit (MTU)
value of your network connection. The
default value is 1500.
TTL
Enable/Disable time to live (TTL) function
which limits the lifespan of network data to
improve performance.
Page 37 / 139
33
III
3
3
1
3.
PPPoE
Select “PPPoE” if your ISP is providing you Internet access via PPPoE
(Point
to
Point Protocol over Ethernet).
User Name
Enter the user name assigned by your ISP
here.
Password
Enter the password assigned by your ISP here.
MAC Address
For some applications, you may need to
designate a specific MAC address for the
router. Please enter the MAC address here. If
you are connecting the router to a computer,
press “Clone Mac” to automatically enter
your computer’s MAC address.
DNS Address
Select “Obtain an IP address automatically” or
“Use the following IP address”. Check with
your ISP if you are unsure.
DNS Address 1, 2 &
3
Enter the DNS address(es) assigned by your
ISP here.
Page 38 / 139
34
TTL
Enable/Disable time to live (TTL) function
which limits the lifespan of network data to
improve performance.
Service Name
Give this Internet service a name (optional).
MTU
Enter the maximum transmission unit (MTU)
value of your network connection. The
default value is 1392.
Connection Type
Specify a connection type:
1.
“Continuous”: Connected all the time.
2.
“Connect on Demand”: Connect when you
initiate an Internet connection.
3.
“Manual”: Connect/disconnect manually
using the “Connect” and “Disconnect”
buttons.
Idle Time Out
Specify the amount of time the router waits
before shutting down an idle connection.
Only available when “Connect on Demand”
(above) is selected.
Enable Dual
WAN
Access
Enable/disable dual WAN access. When you
enable dual WAN access, select an IGMP
source and enter a “Host Name” and “MAC
Address”.
Page 39 / 139
35
III
3
3
1
4.
PPTP
Select “PPTP” if your ISP is providing you Internet access via PPTP
(Point
to
Point Tunneling Protocol). Then select “Obtain an IP address
automatically” or “Use the following IP address” depending on your ISP.
Page 40 / 139
36
Host Name
Enter the host name of your computer here If
required.
MAC Address
For some applications, you may need to designate a
specific MAC address for the router. Please enter
the MAC address here. If you are connecting the
router to a computer, press “Clone Mac” to
automatically enter your computer’s MAC address.
Static IP Address
Input the IP address assigned by your ISP here.
Subnet Mask
Input the subnet mask assigned by your ISP here.
Default Gateway
Address
Input the default gateway assigned by your ISP
here. Some ISPs may call this “Default Route”.
MAC Address
If your ISP filters access by MAC addresses, enter
your computer’s MAC address here. Click “Clone
MAC” to automatically enter your computer’s MAC
address.
DNS Address
Select “Obtain an IP address automatically” or “Use
the following IP address”. Check with your ISP if you
are unsure.
DNS Address 1,2 & 3
Enter the DNS address(es) assigned by your ISP
here.
Enable Dual
WAN
Access
Enable/disable dual WAN access. When you enable
dual WAN access, select an IGMP source and enter
a “Host Name” and “MAC Address”.
User ID
Input the user name assigned by your ISP here.
Password
Input the password assigned by your ISP here.
PPTP Gateway
Input the PPTP gateway assigned by your ISP here.
Connection ID
Specify a reference name/ID for the connection.
MTU
Enter the maximum transmission unit (MTU) value
of your network connection. The default value is
1392.
BEZEQ
ISRAEL
Check the “Enable” box if you are using BEZEQ
network services (Israel users only).
Connection Type
Specify a connection type:
1.
“Continuous”: Connected all the time.
2.
“Connect on Demand”: Connect when you
initiate an Internet connection.
3.
“Manual”: Connect/disconnect manually using
the “Connect” and “Disconnect” buttons.
Idle Time Out
Specify the amount of time the router waits before

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top