Page 16 / 167
Scroll up to view Page 11 - 15
12
9.
The BR-6208AC is working and ready for use. Refer to
IV-2. Connecting to
a Wi-Fi network
if you require more guidance.
Page 17 / 167
13
II-2. Access Point Mode
1.
Select “Access Point” from the top menu and click “Next”.
2.
Connect the
yellow
LAN port of your BR-6208AC to the LAN port of your
existing router using an Ethernet cable, then click “Next”.
3.
Select whether to use the 5GHz wireless frequency, 2.4GHz wireless
frequency or both. If you are not sure, select both.
Page 18 / 167
14
4.
Select “Obtain an IP address automatically” or “Use the following IP
address” for your
BR-6208AC. If you are using a static IP, enter the IP
address, subnet mask and defa
ult gateway. Click “Next” to proceed to the
next step.
“Obtain an IP address automatically” is the recommended setting
for most users. For more guidance on static IP addresses, please
refer to
IV-1. Configuring your IP address
.
Page 19 / 167
15
5.
Enter a name and password for your 2.4GHz & 5GHz wireless networks,
then click “Next” to continue.
6.
A summary of your configuration will be displayed, as shown below.
Check that all of the details are correct and then click “Next” t
o proceed.
If you wish to backup the
device’s
settings, click “Backup this
configuration”
to open a new window and save your current
configuration to a .txt file.
Page 20 / 167
16
7.
Please wait a moment until the BR-6208AC is ready.
8.
A final congratulations screen will indicate that setup is complete. You can
now connect to the device’s new SSID(s) which are shown on the screen
then close the browser window.
19216811.live