Page 6 / 167
Scroll up to view Page 1 - 5
2
I-2. LED Status
LED
Color
LED Status
Description
Power
White
On
BR-6208AC is on.
Off
BR-6208AC is off.
Internet
Blue
On
Internet connection is ready.
Flashing
Factory default state, or Ethernet
cable not connected, or no
Internet connection.
2.4GHz Wi-Fi
Blue
On
2.4GHz Wi-Fi wireless activity
(transferring/receiving data).
Flashing
2.4GHz WPS is active.
Off
2.4GHz Wi-Fi not active.
5GHz Wi-Fi
Blue
On
5GHz Wi-Fi wireless activity
(transferring/receiving data).
Flashing
5GHz WPS is active.
Off
5GHz Wi-Fi not active.
Page 8 / 167
4
I-4. Safety Information
In order to ensure the safe operation of the device and its users, please read
and act in accordance with the following safety instructions.
1. The device is designed for indoor use only; do not place it outdoors.
2. Do not place the device in or near hot/humid places, such as a kitchen or
bathroom.
3. Do not pull any connected cable with force; carefully disconnect it from the
BR-6208AC.
4. Handle the device with care. Accidental damage will void the warranty of
the device.
5. The device contains small parts which are a danger to small children under
3 years old. Please keep the device out of reach of children.
6. Do not place the device on paper, cloth, or other flammable materials. The
device may become hot during use.
7. There are no user-serviceable parts inside the device. If you experience
problems with the device, please contact your dealer of purchase and ask
for help.
8. The device is an electrical device and as such, if it becomes wet for any
reason, do not attempt to touch it without switching the power supply off.
Contact an experienced electrical technician for further help.
Page 9 / 167
5
II.
Installation
1.
Plug the included power adapter into the device’s
DC power port and the
other end into an electrical socket.
2.
Ensure that the Wi-Fi On/Off switch is set to on and that three LEDs
(power, 2.4GHz & 5GHz Wi-Fi) display on.
Page 10 / 167
6
3.
Use a Wi-Fi device (e.g. computer, tablet, smartphone) to search for a
Wi-Fi n
etwork with the SSID “
edimax.s
etup” and connect
to it.
iOS 4 or Android 4 and above are required for setup on a
smartphone or tablet.
4.
Open a web browser and if you do not automatically arrive at the “Get
Started” screen shown below, enter the URL
http://edimax.setup
and click
“Get Started”
to begin the setup process.
If you cannot access
http://edimax.setup
, please make sure your
Wi-Fi device is set to use a dynamic IP address. This is a simple
procedure and step-by-step instructions to do this on a computer
can be found in
IV Appendix
.
5.
Choose if you want to use your BR-6208AC in its default Wi-Fi router
mode or in a different mode.
19216811.live