Page 41 / 48
Scroll up to view Page 36 - 40
4.2 Firmware Upgrade
This page allows you to upgrade the router’s firmware
Parameter
Description
Firmware Upgrade
This tool allows you to upgrade the Broadband router’s system firmware. To upgrade the
firmware of your Broadband router, you need to download the firmware file to your local
hard disk, and enter that file name and path in the appropriate field on this page. You can
also use the Browse button to find the firmware file on your PC.
4.3 Reset
You can reset the router’s system should any problem exist. The reset function essentially
Re-boots your router’s system
Parameter
Description
Reset
In the event that the system stops responding correctly or in some way stops functioning,
you can perform a reset.
Your settings will not be changed
. To perform the reset, click
on the <APPLY> button. You will be asked to confirm your decision. The reset will be
complete when the power light stops blinking. Once the reset process is complete you
may start using the router again.
41
Page 42 / 48
Chapter 5
(For BR-6104KP only)
5.1 Install Print Server Network Driver
1.
Execute Client.exe inside the CD\BR-6104KP folder and the “PrintServer Network driver Setup program” window will
be displayed.
2.
Click “Next” and specify the destination folder where the utility will be installed.
3.
Click “Next” and specify the program folder where the program icons will be added.
42
Page 43 / 48
4.
Click “Next” to start installation.
5.
In a while, the program will finish installing all the utilities and drivers. Thus far you have completed the installation
phase and prepare to use the print server.
6.
Click “
Continue
”, and all the print server’s network ports detected on the network will be added to your PC.
7.
Finally, the “Installation complete” window is displayed to indicate that the Client Installation procedure is finished.
43
Page 44 / 48
5.2 Add a Network Printer
After installing the print server client tool, you can then perform the standard “Add Printer” procedure to add network printer
to your PC.
1.
Click “Start” button, choose “Setting
Î
Printers”.
2.
Double click “Add New Printer”.
3.
Select “Local Printer” and click “Next”.
4.
Select the suitable printer manufacturer and model, then click “Next”.
44
Page 45 / 48
5.
Choose print server’s remote port which has been created in the previous client tools installation process and click
“Next”.
6.
Complete the rest of the questions to finish the network printer setup.
45
19216811.live