EDIMAX AR-7266WnA Router Manual PDF (Setup & Configuration Guide)

Page 41 / 124 Scroll up to view Page 36 - 40

32

Before configuring the router, please check with your ISP (Internet Service

Provider) what kind of the service is provided such as PPPoE, PPPoA or

RFC1483/2684. Gather the information as illustrated in the following table and

keep it for reference.

PPPoE

VPI/VCI, VC-based/LLC-based multiplexing, Username,

Password (and Service Name).

PPPoA

VPI/VCI, VC-based/LLC-based multiplexing, Username,

Password.

RFC1483 Bridged

VPI/VCI, VC-based/LLC-based multiplexing to use Bridged

Mode.

RFC1483 Routed

VPI/VCI, VC-based/LLC-based multiplexing, IP Address,

Subnet Mask, Gateway Address, and Domain Name

System (DNS) IP Address (It is a fixed IP Address).

RFC1483 MER

VPI/VCI, VC-based/LLC-based multiplexing, IP Address,

Subnet Mask, Gateway Address, and Domain Name

System (DNS) IP Address.

Page 42 / 124

33

Parameter

Description

VPI

VPI is a virtual path determines the way an ATM cell

should be routed. The VPI is an 8-bit (in UNI) or 12-bit (in

NNI) number that is included in the header of an ATM

cell. The valid range for the VPI is 0 to 255. Enter the VPI

assigned by the ISP.

VCI

VCI is the label given to an ATM VC to identify it and

determine its destination. The VCI is a 16-bit number that

is included in the header of an ATM cell. The valid range

for the VCI is 32 to 65535. Enter the VCI assigned by the

ISP.

Page 43 / 124

34

Encapsulation

Please check with your ISP the method of multiplexing.

Channel Mode

There are five kinds of channel modes you can select for

ADSL connection. Please check with your ISP the

method of the ADSL connection.

Enable NAPT

Enable or disable NAPT. NAPT, an Internet standard that

enables a local-area network (LAN) to use one set of IP

addresses for internal traffic and a second set of

addresses for external traffic. When NAPT is enabled,

the router will help to make all necessary IP address

translations for the PC connected to the router to access

the Internet.

Admin Status

Enable or disable the PVC channel setting.

PPP Setting

User Name

Enter the username exactly as your ISP assigned.

Password

Enter the password that your ISP has assigned to you.

Type

Continuous

– The connection will be kept always on. If

the connection is interrupted, the router will re-connect

automatically.

Connect on Demand

– Only connect when you want to

surf the Internet. “Idle Time” is set to stop the connection

when the network traffic is not sending or receiving after

an idle time.

Manual

– After you have selected this option, please go

to Status page. You will see the “Connect” button, click it

and the router will connect to the ISP. If you want to stop

the connection, please click “Disconnect” button.

Page 44 / 124

35

Idle Time (ms)

“Idle Time” is set to stop the connection when the

network traffic is not sending or receiving after an idle

time.

WAN IP Setting

Type

Fixed IP

– Set the static IP Address to the router. Please

enter the IP Address your ISP has assigned.

DHCP

–

To get the IP Address from the ISP directly.

Local IP Address

Set the IP Address obtained from your ISP.

Remote IP Address Enter the remote IP Address assigned by your ISP.

Subnet Mask

Enter the Subnet Mask assigned by your ISP.

Unnumbered

The IP Unnumbered configuration allows you to enable

IP processing on a serial interface without assigning it an

explicit IP address. When it is enabled, the router’s WAN

IP Address can "borrow" the IP address of another

interface already configured on the router, which

conserves network and address space. Check it if you

want to assign the WAN IP Address from other interface,

such as client’s IP Address.

Default Route

When “Default Router” is enabled, all the packets for

destinations not known by the router's routing table are

sent to the default route. By default, it is enabled.

Add/Modify

These buttons are for you to maintain the channel

configuration settings.

Current ATM VC Table

The channel you have configured will be listed here. You

can select the VC channel to Edit or Delete.

Page 45 / 124

36

Delete Selected

If you want to delete a specific VC channel entry, check

the ‘select’ box of the VC channel you want to delete,

then click ‘Delete Selected’ button.

Enable Auto-PVC

Search

Check the box and ‘Apply’ button to enable auto PVC

search function.

VPI

VPI is a virtual path determines the way an ATM cell

should be routed.

VCI

VCI is the label given to an ATM VC to identify it and

determine its destination.

Add/Delete

These buttons are for you to maintain the Current Auto-

PVC Table.

When you finish, click ‘Apply Changes’. You’ll see the following message

displayed on web browser:

Press ‘Continue’ to save the settings made and back to web management

interface; press ‘Apply’ to save the settings made and restart the router so the

settings will take effect after it reboots.

5.2.2.2. ATM Setting

The page is for ATM PVC QoS parameters setting.

Rate

Popular EDIMAX Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share