Page 56 / 124
Scroll up to view Page 51 - 55
47
performance of the network.
Ethernet to
Wireless
Blocking
Enable/disable the ‘Ethernet to Wireless Blocking’, when this
function is enabled, the traffic between Ethernet and wireless
interfaces is not allowed.
When you finish, click ‘Apply Changes’. You’ll see the following message
displayed on web browser:
Press ‘Continue’ to save the settings made and back to web management
interface; press ‘Apply’ to save the settings made and restart the router so the
settings will take effect after it reboots.
5.2.3.1. DHCP Mode
You can configure your network and the router to use the Dynamic Host
Configuration Protocol (DHCP). This page allows you to select the DHCP mode
that this router will support.
There are two different DHCP Modes: DHCP Serve and DHCP Relay. When the
router is acting as DHCP server, please configure the router in the “DHCP
Server” page; while acting as DHCP Relay, you can setup the relay in the “DHCP
Relay” page.
Page 57 / 124
48
5.2.3.2. DHCP Relay
Some ISPs perform the DHCP server function for their customers’ home/small
office network. In this case, you can configure this device to act as a DHCP relay
agent. When a user’s computer on your network requests Internet access, the
router contacts your ISP to obtain the IP configuration, and then forward that
information to the computer.
Parameter
Description
DHCP Server Address Specify the IP address of your ISP’s DHCP server.
Requests for IP information from your LAN interface will
be passed to the default gateway, which should route the
request appropriately.
Page 58 / 124
49
When you finish, click ‘Apply Changes’. You’ll see the following message
displayed on web browser:
Press ‘Continue’ to save the settings made and back to web management
interface; press ‘Apply’ to save the settings made and restart the router so the
settings will take effect after it reboots.
5.2.3.3. DHCP Server
When the DHCP server is enabled, the router will automatically give your LAN
clients an IP address. If the DHCP is not enabled then you’ll have to manually set
your LAN client’s IP addresses.
Page 59 / 124
50
Parameter
Description
LAN IP Address
The current IP Address of the router.
Subnet Mask
The current Subnet Mask of the router.
IP Pool Range
You can select a particular IP address range for your
DHCP server to issue IP addresses to your LAN Clients.
By default, the IP range is starting from IP
192.168.2.100
to 192.168.2.200.
Parameter
Description
Show Client
Click this button and a table is displayed. You can know
the assigned IP address, MAC address and time expired
for each DHCP leased client.
Page 60 / 124
51
Subnet Mask
Enther the subnet mask to LAN clients.
Max Lease Time
In the Lease Time setting you can specify the time period
that the DHCP Server lends an IP address to your LAN
clients. The DHCP will change your LAN client’s IP
address when this time threshold period is terminated.
Domain Name
A user-friendly name that refers to the group of hosts
(subnet) that will be assigned addresses from this pool.
Gateway Address
The IP address of the ADSL router.
MAC Base Assignment Click this button and you can assign a static IP Address
to the computer with the designated MAC Address. The
MAC Address is the 12-digit hexadecimal number, for
example "00-d0-59-c6-12-43". The Assigned IP Address
should be a unique IP Address.
When you finish, click ‘Apply Changes’. You’ll see the following message
displayed on web browser:
Press ‘Continue’ to save the settings made and back to web management
interface; press ‘Apply’ to save the settings made and restart the router so the
settings will take effect after it reboots.
19216811.live