Page 26 / 124
Scroll up to view Page 21 - 25
17
6. Click
OK
to confirm the setting. Your PC will now obtain an IP address
automatically from your ADSL Router’s DHCP server.
Note: Please make sure that the router’s DHCP server is the only DHCP
server available on your LAN.
Page 28 / 124
19
5. Web Management Configuration
Once you have configured your PCs to obtain an IP address automatically, the
router’s DHCP server will automatically give your LAN clients an IP address. By
default the router’s DHCP server is enabled so that you can obtain an IP address
automatically. To see if you have obtained an IP address, see Appendix A.
Once your PC has obtained an IP address from your router, enter the default IP
address
192.168.2.1
(router’s IP address) into your PC’s web browser and press
<enter>
The login screen below will appear. Enter the “User Name” and “Password” and
then click <OK> to login. By default the user name is “
admin
” and the password
is “
1234
”. For security reasons it is recommended that you change the password
as soon as possible.
The
HOME
page screen below will appear. The
Home
Page is divided into four
sections:
Quick Setup, General Setup, Status, Tools.
Page 29 / 124
20
Quick Setup
(Section 5.1)
The Quick Setup Wizard provides only the necessary configurations to connect
your ADSL router to your Internet Service Provider (ISP).
General Setup
(Section 5.2)
The ADSL router supports advanced functions like Virtual Server, Access Control,
Hacker Attack Detection and DMZ. We highly recommend you keep the default
settings.
Status
(Section 5.3)
The ADSL router's status information provides the following information about
your ADSL router: Hardware/Firmware version, Serial Number, and its current
operating status.
Tools
(Section 5.4)
ADSL router Tools - Tools include Configuration tools, Firmware upgrade and
Reset.Configuration tools allow you to Backup, Restore, or Restore to Factory
Default setting for your ADSL router. The Firmware upgrade tool allows you to
upgrade your ADSL router's firmware. The RESET tool allows you to reset your
ADSL router.
Page 30 / 124
21
5.1.
Quick Setup
The Quick Start section is designed to get you using the router as quickly as
possible. Before configuring the router, please check with your ISP (Internet
Service Provider) what kind of the service is provided such as PPPoE, PPPoA or
RFC1483/2684. Gather the information as illustrated in the following table and
keep it for reference.
PPPoE
VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password (and Service Name).
PPPoA
VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password.
RFC1483 Bridged
VPI/VCI, VC-based/LLC-based multiplexing to use Bridged
Mode.
RFC1483 Routed
VPI/VCI, VC-based/LLC-based multiplexing, IP Address,
Subnet Mask, Gateway Address, and Domain Name
System (DNS) IP Address (It is a fixed IP Address).
1.
Please go to Quick Setup menu by clicking ‘Quick Setup’ button and the
following page will be displayed :
19216811.live