Page 26 / 80 Scroll up to view Page 21 - 25
5. Web Management Configuration
Once you have configured your PCs to obtain an IP address automatically, the
router’s DHCP server will automatically give your LAN clients an IP address. By
default the router’s DHCP server is enabled so that you can obtain an IP address
automatically. To see if you have obtained an IP address, see Appendix A.
Once your PC has obtained an IP address from your router, enter the default IP
(router’s IP address) into your PC’s web browser and press
The login screen below will appear. Enter the “User Name” and “Password” and
then click <OK> to login. By default the user name is “
” and the password
is “
”. For security reasons it is recommended that you change the password
as soon as possible.
Page 27 / 80
page screen below will appear. The
Page is divided into seven
Quick Start
Interface Setup, Advanced Setup, Access
Management, Maintenance, Status and Help
Quick Start
(Section 5.1)
Follow the setup process in the Quick Start, you can quickly set the router as an
Internet Access device.
Interface Setup
(Section 5.2)
It allows you to configure the Internet, LAN and Wireless access
Advanced Setup
(Section 5.3)
This section contains configurations for the router’s advanced functions such as
Firewall, Virtual Server, DMZ, ADSL Mode, ADSL Type, etc.
Page 28 / 80
Access Management
(Section 5.4)
It allows you to configure ACL, IP Filter, SNMP, UPnP and DDNS functions.
(Section 5.5)
If you want to change the administrator’s password, restart the router, update the
firmware, diagnose the connection or change the Tome Zone of the router,
please select this menu.
(Section 5.6)
The router’s setup information, system log and some statistics can be viewed
If you want to know about the settings of the router quickly, please refer to the
description in the Help menu.
Quick Start
The Quick Start section is designed to get you using the router as quickly as
possible. Before configuring the router, please check with your ISP (Internet
Service Provider) what kind of the service is provided such as PPPoE, PPPoA or
RFC1483/2684. Gather the information as illustrated in the following table and
keep it for reference.
VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password (and Service Name).
VPI/VCI, VC-based/LLC-based multiplexing, Username,
RFC1483 Bridged
VPI/VCI, VC-based/LLC-based multiplexing to use Bridged
RFC1483 Routed
VPI/VCI, VC-based/LLC-based multiplexing, IP Address,
Subnet Mask, Gateway Address, and Domain Name
System (DNS) IP Address (It is a fixed IP Address).
Page 29 / 80
In the Quick Start, click “Run Wizard” to start the configuration.
Please follow the steps in the setup wizard to complete the configuration of the
Internet connection.
Page 30 / 80
Step 1: Set your new password
Please enter the new password and confirm the password again.
Step 2: Choose your tome zone
Please select the tome zone where you are located.


3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!