Page 21 / 80
Scroll up to view Page 16 - 20
13
4.
In the Internet Protocol (TCP/IP) Properties window, select
Obtain an IP
address automatically
and
Obtain DNS server address automatically
as
shown on the following screen.
5. Click
OK
to confirm the setting. Your PC will now obtain an IP address
automatically from your router’s DHCP server.
Note: Please make sure that the router’s DHCP server is the only DHCP
server available on your LAN.
Page 22 / 80
14
Windows 2000
1.
Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control Panel
window will appear.
2.
Double-click Network and Dial-up Connections icon. In the Network and Dial-
up Connection window, double-click Local Area Connection icon. The Local
Area Connection window will appear.
3. In the
Local Area Connection
window, click the
Properties
button.
4.
Check your list of Network Components. You should see
Internet Protocol
[TCP/IP]
on your list. Select it and click the
Properties
button.
5.
In the Internet Protocol (TCP/IP) Properties window, select
Obtain an IP
address automatically
and
Obtain DNS server address automatically
as
shown on the following screen.
Page 23 / 80
15
6. Click
OK
to confirm the setting. Your PC will now obtain an IP address
automatically from your Broadband Router’s DHCP server.
Note: Please make sure that the router’s DHCP server is the only DHCP
server available on your LAN.
Windows 95/98/Me
1. Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control Panel
window will appear.
2. Double-click
Network
icon. The
Network
window will appear.
3.
Check your list of Network Components. If TCP/IP is not installed, click the
Add button to install it now. If TCP/IP is installed, go to step 6.
4.
In the Network Component Type dialog box, select
Protocol
and click
Add
button.
5.
In the Select Network Protocol dialog box, select
Microsoft and TCP/IP
and
then click the OK button to start installing the TCP/IP protocol. You may need
your Windows CD to complete the installation.
6.
After installing TCP/IP, go back to the Network dialog box. Select
TCP/IP
from the list of Network Components and then click the
Properties
button.
7.
Check each of the tabs and verify the following settings:
Bindings
: Check Client for Microsoft Networks and File and printer sharing
for Microsoft Networks.
Gateway
: All fields are blank.
DNS Configuration
: Select Disable DNS.
WINS Configuration
: Select Disable WINS Resolution.
IP Address
: Select Obtain IP address automatically.
Page 24 / 80
16
8.
Reboot the PC. Your PC will now obtain an IP address automatically from
your router’s DHCP server.
Note: Please make sure that the router’s DHCP server is the only DHCP
server available on your LAN.
Windows NT
1. Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control Panel window will appear.
2. Double-click
Network
icon. The
Network
window will appear. Select the
Protocol
tab from the
Network
window.
3. Check if the
TCP/IP Protocol
is on your list of
Network Protocols
. If TCP/IP is
not installed, click the
Add
button to install it now. If TCP/IP is installed, go to
step 5.
4. In the
Select Network Protocol
window, select the
TCP/IP Protocol
and click
the
Ok
button to start installing the TCP/IP protocol. You may need your
Windows CD to complete the installation.
Page 25 / 80
17
5.
After you install TCP/IP, go back to the
Network
window. Select
TCP/IP
from
the list of
Network Protocols
and then click the
Properties
button.
6.
Check each of the tabs and verify the following settings:
IP Address
: Select Obtain an IP address from a DHCP server.
DNS
: Let all fields are blank.
WINS
: Let all fields are blank.
Routing
: Let all fields are blank.
7.
Click OK to confirm the setting. Your PC will now obtain an IP address
automatically from your Broadband Router’s DHCP server.
Note: Please make sure that the router’s DHCP server is the only DHCP
server available on your LAN.
19216811.live