Page 21 / 304
Scroll up to view Page 16 - 20
VigorPro5300 Series User’s Guide
13
NT mode in
VoIP>> Phone Settings
, the
orange
LED will light on to indicate
ISDN2-S0
is
selected. And by using ISDN phone adapters (coming from the router package), the user can
connect several phones to Vigor5300VS for communication. Refer to the following figure
for reference.
Yet, if the user configures ISDN S0 2 as TE Mode in
VoIP>> Phone Settings
, the
green
LED will light on to indicate
ISDN2-TE
is selected. Then, the port is specified for ISDN
line only. Refer to the following figure for reference.
(For the detailed information of LED status, please refer to section 1.2.)
Page 22 / 304
VigorPro5300 Series User’s Guide
14
Page 23 / 304
VigorPro5300 Series User’s Guide
15
2
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
i
i
n
n
g
g
B
B
a
a
s
s
i
i
c
c
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
For use the router properly, it is necessary for you to change the password of web
configuration for security and adjust primary basic settings.
This chapter explains how to setup a password for an administrator and how to adjust basic
settings for accessing Internet successfully. Be aware that only the administrator can change
the router configuration.
2.1 Changing Password
To change the password for this device, you have to access into the web browse with default
password first.
1.
Make sure your computer connects to the router correctly.
Notice:
You may either simply set up your computer to get IP dynamically from the
router or set up the IP address of the computer to be the same subnet as
the default
. For the detailed information, please refer
to the later section - Trouble Shooting of this guide.
2.
Open a web browser on your PC and type
A pop-up window will
open to ask for username and password. Please type default values (both username and
password are Null) on the window for the first time accessing and click
OK
for next
screen.
Page 24 / 304
VigorPro5300 Series User’s Guide
16
3.
Now, the
Main Screen
will pop up.
Note:
The home page will change slightly in accordance with the router you have.
4.
Go to
System
Maintenance
page and choose
Administrator Password
.
5.
Enter the login password (the default is blank) on the field of
Old Password
. Type a
new one in the field of
New Password
and retype it on the field of
Retype New
Password
. Then click
OK
to continue.
6.
Now, the password has been changed. Next time, use the new password to access the
Web Configurator for this router.
Page 25 / 304
VigorPro5300 Series User’s Guide
17
2.2 Quick Start Wizard
If your router can be under an environment with high speed NAT, the configuration provide
here can help you to deploy and use the router quickly. The first screen of
Quick Start
Wizard
is entering login password. After typing the password, please click
Next
.
On the next page as shown below, please select the WAN interface that you use. Choose
Auto negotiation
as the physical type for your router. Then click
Next
for next step.
19216811.live