1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. VigorPro 5300
    5. /
  5. 9
Page 41 / 304 Scroll up to view Page 36 - 40
VigorPro5300 Series User’s Guide
33
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP
address to the WAN interface.
To use
Static or Dynamic IP
as the accessing protocol of the internet, please choose
Internet Access
from
WAN
menu. Then, select
Static or Dynamic IP
mode for WAN2.
The following web page will be shown.
Static or Dynamic IP
(DHCP Client)
Click
Enable
for activating this function. If you click
Disable
,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
ISDN Dial Backup
Setup
This setting is available for the routers supporting ISDN function
only. Before utilizing the ISDN dial backup feature, you must
create a dial backup profile first.
None
- Disable the backup function.
Packet Trigger -
The backup line is not on until a packet from a
local host triggers the router to establish a connection.
This setting is available for
i
model only.
Keep WAN
Connection
Normally, this function is designed for Dynamic IP environments
because some ISPs will drop connections if there is no traffic
within certain periods of time. Check
Enable PING to keep alive
box to activate this function.
PING to the IP
- If you enable the PING function, please specify
the IP address for the system to PING it for keeping alive.
Page 42 / 304
VigorPro5300 Series User’s Guide
34
PING Interval
- Enter the interval for the system to execute the
PING operation.
WAN Connection
Detection
Such function allows you to verify whether network connection is
alive or not through ARP Detect or Ping Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system to
execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you have
to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference. TTL
value is set by telnet command.
RIP Protocol
Routing Information Protocol is abbreviated as RIP(RFC1058
）
specifying how routers exchange routing tables information. Click
Enable RIP
for activating this function.
WAN IP Network
Settings
This group allows you to obtain an IP address automatically and
allows you type in IP address manually.
WAN IP Alias
- If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use WAN
IP Alias. You can set up to 8 public IP addresses other than the
current one you are using. Notice that this setting is available for
WAN1 only.
Obtain an IP address automatically
– Click this button to obtain
the IP address automatically if you want to use
Dynamic IP
mode.
Router Name
:
Type in the router name provided by ISP.
Domain Name
:
Type in the domain name that you have assigned.
Specify an IP address
– Click this radio button to specify some
data if you want to use
Static IP
mode.
IP Address
:
Type the IP address.
Subnet Mask
:
Type the subnet mask.
Gateway IP Address
:
Type the gateway IP address.
Default MAC Address
: Click this radio button to use default MAC
address for the router.
Page 43 / 304
VigorPro5300 Series User’s Guide
35
Specify a MAC Address
: Some Cable service providers specify a
specific MAC address for access authentication. In such cases you
need to click the
Specify a MAC Address
and enter the MAC
address in the MAC Address field.
DNS Server IP
Address
Type in the primary IP address for the router if you want to use
Static IP
mode. If necessary, type in secondary IP address for
necessity in the future.
Details Page for PPTP
To use
PPTP
as the accessing protocol of the internet, please choose
Internet Access
from
WAN
menu. Then, select
PPTP
mode for WAN2. The following web page will be shown.
PPTP Setup
PPTP Link
- Click
Enable
to enable a PPTP client to establish a
tunnel to a DSL modem on the WAN interface.
PPTP Server
- Specify the IP address of the PPTP server.
ISP Access Setup
Username
-Type in the username provided by ISP in this field.
Password
-Type in the password provided by ISP in this field.
Index (1-15) in Schedule Setup -
You can type in four sets of time
schedule for your request. All the schedules can be set previously
in
Application – Schedule
web page and you can use the number
that you have set in that web page.
ISDN Dial Backup
Setup
This setting is available for the routers supporting ISDN function
only. Before utilizing the ISDN dial backup feature, you must
create a dial backup profile first.
None
- Disable the backup function.
Packet Trigger -
The backup line is not on until a packet from a
local host triggers the router to establish a connection.
This setting is available for
i
model only.
Page 44 / 304
VigorPro5300 Series User’s Guide
36
PPP Setup
PPP Authentication
- Select
PAP only
or
PAP or CHAP
for PPP.
Idle Timeout
- Set the timeout for breaking down the Internet after
passing through the time without any action. This setting is active
only when the
Active on demand
option for Active Mode is
selected in
WAN>> General Setup
page.
IP Address
Assignment
Method(IPCP)
Fixed IP
- Usually ISP dynamically assigns IP address to you
each time you connect to it and request. In some case, your ISP
provides service to always assign you the same IP address
whenever you request. In this case, you can fill in this IP address
in the Fixed IP field. Please contact your ISP before you want to
use this function. Click
Yes
to use this function and type in a
fixed IP address in the box.
Fixed IP Address -
Type a fixed IP address.
WAN IP Alias
- If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use WAN
IP Alias. You can set up to 8 public IP addresses other than the
current one you are using. Notice that this setting is available for
WAN1 only.
Default MAC Address
– Click this radio button to use default
MAC address for the router.
Specify a MAC Address
- Some Cable service providers specify a
specific MAC address for access authentication. In such cases you
need to click the
Specify a MAC Address
and enter the MAC
address in the MAC Address field.
WAN IP Network
Settings
Obtain an IP address automatically
– Click this button to obtain
the IP address automatically.
Specify an IP address
– Click this radio button to specify some
data.
IP Address
– Type the IP address.
Subnet Mask
– Type the subnet mask.
Page 45 / 304
VigorPro5300 Series User’s Guide
37
3.1.4 Load-Balance Policy
This router supports the function of load balancing. It can assign traffic with protocol type,
IP address for specific host, a subnet of hosts, and port range to be allocated in WAN1 or
WAN2 interface. The user can assign traffic category and force it to go to dedicate network
interface based on the following web page setup. Twenty policies of load-balance are
supported by this router.
Note:
Load-Balance Policy is running only when both WAN1 and WAN2 are
activated.
Index
Click the number of index to access into the load-balance policy
configuration web page.
Enable
Check this box to enable this policy.
Protocol
Use the drop-down menu to change the protocol for the WAN
interface.
WAN
Use the drop-down menu to change the WAN interface.
Src IP Start
Displays the IP address for the start of the source IP.
Src IP End
Displays the IP address for the end of the source IP.
Dest IP Start
Displays the IP address for the start of the destination IP.
Dest IP End
Displays the IP address for the end of the destination IP.

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top