1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. VigorPro 5300
    5. /
  5. 3
Page 11 / 304 Scroll up to view Page 6 - 10
VigorPro5300 Series User’s Guide
3
Interface
Description
Factory Reset
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for
more than 5 seconds. When you see the ACT LED begins to blink rapidly than
usual, release the button. Then the router will restart with the factory default
configuration.
Restart
Restart the router forcefully.
WAN(1/2)
Connecters for remote networked devices.
LAN (1-4)
Connecters for local networked devices.
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.
Page 12 / 304
VigorPro5300 Series User’s Guide
4
1.1.2 For VigorPro5300n
LED
Status
Explanation
Blinking
The router is powered on and running normally.
ACT (Activity)
Off
The router is powered off.
IDP (Intrusion Detection and
Prevention)
On
(Yellow)
The anti-intrusion function is enabled.
Virus
On
(Yellow)
The anti-virus function is enabled.
On
Wireless access point is ready.
WLAN
Blinking
It will blink slowly while wireless traffic goes
through.
If ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and it will
return to normal condition after two minutes. (You
need to setup WPS within 2 minutes.)
On
The WAN1 or WAN2 connection is ready.
WAN1/2
Blinking
It will blink while transmitting data.
On
The router is managed (handled) by Telnet.
MGMT
Blinking
It will blink while being managed by IE browser.
VPN
On
The VPN tunnel is active.
QoS
On
The QoS function is active.
LED on Connector
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
WAN 1/2
Right LED
(Green)
Off
The port is connected with 10Mbps.
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
LAN 1/2/3/4
Right LED
(Green)
Off
The port is connected with 10Mbps.
Page 13 / 304
VigorPro5300 Series User’s Guide
5
Interface
Description
Wireless LAN
ON/OFF/WPS
Factory Reset
Press "Wireless LAN ON/OFF/WPS" button for 2 seconds to wait for client
device making network connection through WPS.
Press "Wireless LAN ON/OFF/WPS" button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Restart
Restart the router forcefully.
Phone (1/2)
Connecters for PSTN phones.
WAN (1/2)
Connecters for remote networked devices.
LAN (1-4)
Connecters for local networked devices.
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.
Page 14 / 304
VigorPro5300 Series User’s Guide
6
1.1.3 For VigorPro5300Vn
LED
Status
Explanation
Blinking
The router is powered on and running normally.
ACT (Activity)
Off
The router is powered off.
IDP (Intrusion Detection and
Prevention)
On
(Yellow)
The anti-intrusion function is enabled.
Virus
On
(Yellow)
The anti-virus function is enabled.
On
Wireless access point is ready.
WLAN
Blinking
It will blink slowly while wireless traffic goes
through.
If ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and it will
return to normal condition after two minutes. (You
need to setup WPS within 2 minutes.)
On
The WAN1 or WAN2 connection is ready.
WAN1/2
Blinking
It will blink while transmitting data.
On
The router is managed by Telnet.
MGMT
Blinking
It will blink while being managed by IE browser.
On
The phone connected to this port is off-hook.
Off
The phone connected to this port is on-hook.
Phone 1/2
Blinking
A phone call comes.
LED on Connector
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
WAN 1/2
Right LED
(Green)
Off
The port is connected with 10Mbps.
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
LAN 1/2/3/4
Right LED
(Green)
Off
The port is connected with 10Mbps.
Page 15 / 304
VigorPro5300 Series User’s Guide
7
Interface
Description
Wireless LAN
ON/OFF/WPS
Factory Reset
Press "Wireless LAN ON/OFF/WPS" button for 2 seconds to wait for client
device making network connection through WPS.
Press "Wireless LAN ON/OFF/WPS" button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Restart
Restart the router forcefully.
Phone (1/2)
Connecters for PSTN phones.
WAN (1/2)
Connecters for remote networked devices.
LAN (1-4)
Connecters for local networked devices.
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top