DrayTek Vigor-2930n Router Manual PDF (Setup & Configuration Guide)

Page 176 / 298 Scroll up to view Page 171 - 175

Vigor2930 Series User’s Guide

168

SIP server.

OP Number

The front number you type here is the first part of the account

number that you want to execute special function (according

to the chosen mode) by using the prefix number.

Min Len

Set the minimal length of the dial number for applying the

prefix number settings. Take the above picture (Prefix Table

Setup web page) as an example, if the dial number is between

7 and 9, that number can apply the prefix number settings

here.

Max Len

Set the maximum length of the dial number for applying the

prefix number settings.

Interface

Choose the one that you want to enable the prefix number

settings from the saved SIP accounts. Please set up one SIP

account first to make this interface available.

Call Barring

Call barring is used to block phone calls that are not welcomed.

Click any index number to display the dial plan setup page.

Page 177 / 298

igor2930 Series User’s Guide

169

Enable

Click this to enable this entry.

Call Direction

Determine the direction for the phone call, IN – incoming call,

OUT-outgoing call, IN & OUT – both incoming and outgoing

calls.

Barring Type

Determine the type of the VoIP phone call, URI/URL or

number.

Specific URI/URL or Specific Number -

This field will be

changed based on the type you selected for barring Type.

Interface

“All” means all the phone calls (including ISDN & PSTN)

will be blocked with such mechanism.

”ISDN” means only ISDN phone call will be blocked with

such mechanism.

Index (1-15) in Schedule

Enter the index of schedule profiles to control the call barring

according to the preconfigured schedules. Refer to section

3.5.2 Schedule

for detailed configuration.

Additionally, you can set advanced settings for call barring such as

Block Anonymous

,

Block Unknown Domain

or

Block IP Address

. Simply click the relational links to open the

web page.

For

Block Anonymous –

this function can block the incoming calls without caller ID on the

interface (Phone 1 or Phone 2 or both) specified in the following window. Such controlling

also can be done based on preconfigured schedules.

Page 178 / 298

Vigor2930 Series User’s Guide

170

For

Block Unknown Domain –

this function can block incoming calls from unrecognized

domain that is not specified in SIP accounts. Such controlling also can be done based on

preconfigured schedules.

For

Block IP Address –

this function can block incoming calls coming from IP address.

Such controlling also can be done based on preconfigured schedules.

Regional

This page allows you to process incoming or outgoing phone calls by regional. Default

values (common used in most areas) will be shown on this web page. You

can change

the

number based on the region that the router is placed.

Page 179 / 298

igor2930 Series User’s Guide

171

Last Call Return [Miss]

Sometimes, people might miss some phone calls. Please dial

number typed in this field to know where the last phone call

comes from and call back to that one.

Last Call Return [In]

You have finished an incoming phone call, however you want

to call back again for some reason. Please dial number typed

in this field to call back to that one.

Last Call Return [Out]

Dial the number typed in this field to call the previous

outgoing phone call again.

Call Forward [All][Act]

Dial the number typed in this field to forward all the incoming

calls to the specified place.

Call Forward [Deact]

Dial the number typed in this field to release the call forward

function.

Call Forward [Busy][Act]

Dial the number typed in this field to forward all the incoming

calls to the specified place while the phone is busy.

Call Forward [No Ans][Act]

Dial the number typed in this field to forward all the incoming

calls to the specified place while there is no answer of the

connected phone.

Do Not Disturb [Act]

Dial the number typed in this field to invoke the function of

DND.

Do Not Distrub [Deact]

Dial the number typed in this field to release the DND

function.

Hide caller ID [Act]

Dial the number typed in this field to make your phone

number (ID) not displayed on the display panel of remote end.

Hide caller ID [Deact]

Dial the number typed in this field to release this function.

Page 180 / 298

Vigor2930 Series User’s Guide

172

Call Waiting [Act]

Dial the number typed in this field to make all the incoming

calls waiting for your answer.

Call Waiting [Deact]

Dial the number typed in this field to release this function.

Block Anonymous[Act]

Dial the number typed in this field to block all the incoming

calls with unknown ID.

Block Anonymous[Deact]

Dial the number typed in this field to release this function.

Block Unknown Domain

[Act]

Dial the number typed in this field to block all the incoming

calls from unknown domain.

Block Unknown Domain

[Deact]

Dial the number typed in this field to release this function.

Block IP Calls [Act]

Dial the number typed in this filed to block all the incoming

calls from IP address.

Block IP Calls [Deact]

Dial the number typed in this field to release this function.

Block Last Calls [Act]

Dial the number typed in this field to block the last incoming

phone call.

3.11.2 SIP Accounts

In this section, you set up your own SIP settings. When you apply for an account, your SIP

service provider will give you an

Account Name

or user name,

SIP Registrar, Proxy,

and

Domain name

. (The last three might be the same in some case). Then you can tell your folks

your SIP Address as in

Account Name@ Domain name

As Vigor VoIP Router is turned on, it will first register with Registrar using

AuthorizationUser@Domain/Realm. After that, your call will be bypassed by SIP Proxy to

the destination using AccountName@Domain/Realm as identity.

Rate

Popular DrayTek Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share