1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2930n
    5. /
  5. 32
Page 156 / 298 Scroll up to view Page 151 - 155
Vigor2930 Series User’s Guide
148
Backup Profile List
Set to Factory Default -
Click to clear all VPN
TRUNK-VPN Backup mechanism profile.
No –
The order of VPN TRUNK-VPN Backup mechanism
profile.
Status (on Backup Profile field)
- “v” means such profile is
enabled; “x” means such profile is disabled.
Name (on Backup Profile field) -
Display the name of VPN
TRUNK-VPN Backup mechanism profile.
Member1 (on Backup Profile field) -
Display the dial-out
profile selected from the Member1 drop down list below.
Active (on Backup Profile field) -
“Yes” means normal
condition. ”No” means the state might be disabled or that
profile currently is set with Dial-in mode (for call direction)
in LAN-to-LAN.
Type (on Backup Profile field) -
Display the connection type
for that profile, such as IPSec, PPTP, L2TP, L2TP over IPSec
(NICE), L2TP over IPSec(MUST) and so on.
Member2 (on Backup Profile field) -
Display the dial-out
Page 157 / 298
igor2930 Series User’s Guide
149
profile selected from the Member2 drop down list below.
Advanced
– This button is only available when there is one
profile (or more) created in this page.
Detailed information for this dialog, see later section -
Advanced Load Balance and Backup
.
Load Balance Profile List
Set to Factory Default -
Click to clear all VPN
TRUNK-VPN Load Balance mechanism profile.
No
-
The order of VPN TRUNK-VPN Load Balance
mechanism profile.
Status
- “v” means such profile is enabled; ”x” means such
profile is disabled.
Name -
Display the name of VPN TRUNK-VPN Load
Balance mechanism profile.
Member1 -
Display the dial-out profile selected from the
Member1 drop down list below.
Active -
“Yes” means normal condition. ”No” means the state
might be disabled or that profile currently is set with Dial-in
mode (for call direction) in LAN-to-LAN.
Type -
Display the connection type for that profile, such as
IPSec, PPTP, L2TP, L2TP over IPSec (NICE), L2TP over
IPSec(MUST) and so on.
Member2 -
Display the dial-out profile selected from the
Member2 drop down list below.
Advanced
– This button is only available when there is one or
more profiles created in this page.
Page 158 / 298
Vigor2930 Series User’s Guide
150
Detailed information for this dialog, see later section -
Advanced Load Balance and Backup
.
General Setup
Status
- After choosing one of the profile listed above, please
click
Enable
to activate this profile. If you click
Disable
, the
selected or current used VPN TRUNK-Backup/Load Balance
mechanism profile will not have any effect for VPN tunnel.
Profile Name
- Type a name for VPN TRUNK profile. Each
profile can group two VPN connections set in LAN-to-LAN.
The saved VPN profiles in LAN-to-LAN will be shown on
Member1 and Member2 fields.
Member 1/Member2
- Display the selection for
LAN-to-LAN dial-out profiles (configured in
VPN and
Remote Access >> LAN-to-LAN
) for you to choose for
grouping under certain VPN TRUNK-VPN Backup/Load
Balance mechanism profile.
No
-
Index number of LAN-to-LAN dial-out profile.
Name
-
Profile name of LAN-to-LAN dial-out profile.
Connection Type
-
Connection type of LAN-to-LAN dial-out
profile.
VPN ServerIP (Private Network)
-
VPN Server IP of
LAN-to-LAN dial-out profiles.
Attribute Mode
- Display available mode for you to choose.
Choose
Backup
or
Load Balance
for your router.
Add
Add and save new profile to the backup profile list. The
corresponding members (LAN-to-LAN profiles) grouped in
such new VPN TRUNK – VPN Backup mechanism profile
will be locked. The profiles in LAN-to-LAN will be
displayed in red. VPN TRUNK – VPN Load Balance
mechanism profile will be locked. The profiles in
Page 159 / 298
igor2930 Series User’s Guide
151
LAN-to-LAN will be displayed in blue.
Edit
Click this button to save the changes to the
Status
(Enable or
Disable), profile name, member1 or member2.
Delete
Click this button to delete the selected VPN TRUNK profile.
The corresponding members (LAN-to-LAN profiles) grouped
in the deleted VPN TRUNK profile will be released and that
profiles in LAN-to-LAN will be displayed in black.
Time for activating VPN TRUNK – VPN Backup mechanism profile
VPN TRUNK – VPN Backup mechanism will be activated automatically after the initial
connection of single VPN Tunnel off-line. The content in Member1/2 within VPN
TRUNK – VPN Backup mechanism backup profile is similar to dial-out profile configured
in LAN-to-LAN web page. VPN TRUNK – VPN Backup mechanism backup profile will
process and handle everything unless it is off-line once it is activated.
Time for activating VPN TRUNK – VPN Load Balance mechanism profile
After finishing the connection for one tunnel, the other tunnel will dial out automatically
within two seconds. Therefore, you can choose any one of members under VPN Load
Balance for dialing out.
Time for activating VPN TRUNK –Dial-out when VPN Load Balance
Disconnected
For there is one Tunnel created and connected successfully, to keep the load balance effect
between two tunnels, auto-dial will be executed within two seconds.
To close two tunnels of load balance after connecting, please click
Disable
for
Status
in
General Setup
field.
How can you set a VPN TRUNK-VPN Backup/Load Balance mechanism
profile?
1.
First of all, go to
VPN and Remote Access>>LAN-to-LAN
. Set two or more
LAN-to-LAN profiles first that will be used for Member1 and Member2. If you do not
set enough LAN-to-LAN profiles, you cannot operate VPN TRUNK – VPN Backup
/Load Balance mechanism profile management well.
2.
Access into
VPN and Remote Access>>VPN TRUNK Management
.
3.
Set one group of VPN TRUNK – VPN Backup/Load Balance mechanism backup
profile by choosing
Enable
radio button; type a name for such profile (e.g., 071023);
choose one of the LAN-to-LAN profiles from Member1 drop down list; choose one of
the LAN-to-LAN profiles from Member2 drop down list; and click
Add
at last.
Page 160 / 298
Vigor2930 Series User’s Guide
152
4.
Take a look for LAN-to-LAN profiles. Index 1 is chosen as Member1; index 2 is chosen
as Member2. For such reason, LAN-to-LAN profiles of 1 and 2 will be expressed in red
to indicate that they are fixed. If you delete the VPN TRUNK – VPN Backup/Load
Balance mechanism profile, the selected LAN-to-LAN profiles will be released and
expressed in black.
How can you set a GRE over IPSec profile?
1.
Please go to LAN to LAN to set a profile with IPSec.
2.
If the router will be used as the VPN Server (i.e., with virtual address 192.168.50.200).
Please type 192.168.50.200 in the field of My GRE IP. Type IP address (192.168.50.100)
of the client in the field of Peer GRE IP. See the following graphic for an example.
3.
Later, on peer side (as VPN Client): please type 192.168.50.100 in the field of My
GRE IP and type IP address of the server (192.168.50.200) in the field of Peer GRE
IP.

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top