igor2930 Series User’s Guide

33

Details Page for PPPoE

To use

PPPoE

as the accessing protocol of the internet, please choose

Internet Access

from

WAN

menu. Then, select

PPPoE

mode for WAN2. The following web page will be shown.

PPPoE Client Mode

Click

Enable

for activating this function. If you click

Disable

, this

function will be closed and all the settings that you adjusted in this

page will be invalid.

ISP Access Setup

Enter your allocated username, password and authentication

parameters according to the information provided by your ISP. If

you want to connect to Internet all the time, you can check

Always

On

.

Username

– Type in the username provided by ISP in this field.

Password

– Type in the password provided by ISP in this field.

Index (1-15) in Schedule Setup -

You can type in four sets of time

schedule for your request. All the schedules can be set previously

in

Application >> Schedule

web page and you can use the number

that you have set in that web page.

ISDN Dial Backup

Setup

This setting is available for the routers supporting ISDN function

only. Before utilizing the ISDN dial backup feature, you must

create a dial backup profile first. Please click

ISDN

>

Dialing to

a Single ISP

to create the backup profile.

None

- Disable the backup function.

Packet Trigger -

The backup line is not on until a packet from a

local host triggers the router to establish a connection.

This setting is available for

i

model only.

WAN Connection

Such function allows you to verify whether network connection is

alive or not through ARP Detect or Ping Detect.

Vigor2930 Series User’s Guide

34

Detection

Mode

– Choose

ARP Detect

or

Ping Detect

for the system to

execute for WAN detection.

Ping IP

– If you choose Ping Detect as detection mode, you have

to type IP address in this field for pinging.

TTL (Time to Live)

– Displays value for your reference. TTL

value is set by telnet command.

MTU

Mean maximum transmission unit of one packet. The default

value is 1442.

PPP/MP Setup

PPP Authentication

– Select

PAP only

or

PAP or CHAP

for

PPP.

Idle Timeout

– Set the timeout for breaking down the Internet

after passing through the time without any action. This setting is

active only when the

Active on demand

option for Active Mode is

selected in

WAN>> General Setup

page.

IP Address

Assignment Method

(IPCP)

Usually ISP dynamically assigns IP address to you each time you

connect to it and request. In some case, your ISP provides service

to always assign you the same IP address whenever you request.

In this case, you can fill in this IP address in the Fixed IP field.

Please contact your ISP before you want to use this function.

WAN IP Alias

- If you have multiple public IP addresses and

would like to utilize them on the WAN interface, please use WAN

IP Alias. You can set up to 8 public IP addresses other than the

current one you are using. Notice that this setting is available for

WAN1 only.

Fixed IP

– Click

Yes

to use this function and type in a fixed IP

address in the box of

Fixed IP Address

.

Default MAC Address

– You can use

Default MAC Address

or

specify another MAC address by typing on the boxes of MAC

Address for the router.

Specify a MAC Address –

Type the MAC address for the router

manually.

igor2930 Series User’s Guide

35

After finishing all the settings here, please click

OK

to activate them.

Details Page for Static or Dynamic IP

For static IP mode, you usually receive a fixed public IP address or a public subnet, namely

multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a

Cable service provider will offer a fixed public IP, while a DSL service provider will offer a

public subnet. If you have a public subnet, you could assign an IP address or many IP

address to the WAN interface.

To use

Static or Dynamic IP

as the accessing protocol of the internet, please choose

Internet Access

from

WAN

menu. Then, select

Static or Dynamic IP

mode for WAN2.

The following web page will be shown.

Static or Dynamic IP

(DHCP Client)

Click

Enable

for activating this function. If you click

Disable

,

this function will be closed and all the settings that you adjusted

in this page will be invalid.

ISDN Dial Backup

Setup

This setting is available for the routers supporting ISDN function

only. Before utilizing the ISDN dial backup feature, you must

create a dial backup profile first. Please click

Internet Access

Setup

>

Dialing to a Single ISP

to enter the backup profile.

None

- Disable the backup function.

Packet Trigger -

The backup line is not on until a packet from a

local host triggers the router to establish a connection.

This setting is available for

i

model only.

Keep WAN

Connection

Normally, this function is designed for Dynamic IP environments

because some ISPs will drop connections if there is no traffic

within certain periods of time. Check

Enable PING to keep alive

box to activate this function.

Vigor2930 Series User’s Guide

36

PING to the IP

- If you enable the PING function, please specify

the IP address for the system to PING it for keeping alive.

PING Interval

- Enter the interval for the system to execute the

PING operation.

RIP Protocol

Routing Information Protocol is abbreviated as RIP (RFC1058)

specifying how routers exchange routing tables information. Click

Enable RIP

for activating this function.

WAN Connection

Detection

Such function allows you to verify whether network connection is

alive or not through ARP Detect or Ping Detect.

Mode

– Choose

ARP Detect

or

Ping Detect

for the system to

execute for WAN detection.

Ping IP

– If you choose Ping Detect as detection mode, you have

to type IP address in this field for pinging.

TTL (Time to Live)

– Displays value for your reference. TTL

value is set by telnet command.

MTU

Mean maximum transmission unit of one packet. The default

value is 1442.

WAN IP Network

Settings

This group allows you to obtain an IP address automatically and

allows you type in IP address manually.

WAN IP Alias

- If you have multiple public IP addresses and

would like to utilize them on the WAN interface, please use WAN

IP Alias. You can set up to 8 public IP addresses other than the

current one you are using. Notice that this setting is available for

WAN1 only.

Obtain an IP address automatically

– Click this button to obtain

the IP address automatically if you want to use

Dynamic IP

mode.

Router Name

:

Type in the router name provided by ISP.

Domain Name

:

Type in the domain name that you have assigned.

Specify an IP address

– Click this radio button to specify some

data if you want to use

Static IP

mode.

IP Address

:

Type the IP address.

igor2930 Series User’s Guide

37

Subnet Mask

:

Type the subnet mask.

Gateway IP Address

:

Type the gateway IP address.

Default MAC Address

: Click this radio button to use default MAC

address for the router.

Specify a MAC Address

: Some Cable service providers specify a

specific MAC address for access authentication. In such cases you

need to click the

Specify a MAC Address

and enter the MAC

address in the MAC Address field.

DNS Server IP

Address

Type in the primary IP address for the router if you want to use

Static IP

mode. If necessary, type in secondary IP address for

necessity in the future.

Details Page for PPTP/L2TP

To use

PPTP

as the accessing protocol of the internet, please choose

Internet Access

from

WAN

menu. Then, select

PPTP

mode for WAN2. The following web page will be shown.

PPTP/L2TP Client

Mode

Enable PPTP / Enable L2TP

- Click

Enable PPTP / Enable

L2TP

to enable a PPTP/L2TP client to establish a tunnel to a

DSL modem on the WAN interface.

Server Address –

Type the IP address for PPTP or L2TP server.

Specify Gateway IP Address

- Specify the gateway for the

PPTP/L2TP server.

ISP Access Setup

Username

-Type in the username provided by ISP in this field.

Password

-Type in the password provided by ISP in this field.

Index (1-15) in Schedule Setup -

You can type in four sets of

time schedule for your request. All the schedules can be set

previously in

Application – Schedule

web page and you can use

the number that you have set in that web page.