igor2930 Series User’s Guide

13

1.4 ISDN Phone Adapter Installation

Such information is provided for Vigor2930 S models (e.g., Vigor2930VS).

ISDN S0 1 is always fixed to connect ISDN phone. However, ISDN S0 2 is configurable as

ISDN line or ISDN phone. When the user configures ISDN S0 2 as ISDN phone in

VoIP>>

Phone Settings

, the

orange

LED will light on to indicate

ISDN2-S0

mode is selected. And

by using ISDN phone adapters (coming from the router package), the user can connect

several phones (the maximum is six) to Vigor2930VS for communication. Refer to the

following figure for reference.

However, if the user configures ISDN S0 2 as ISDN line in

VoIP>> Phone Settings

, the

green

LED will light on to indicate ISDN2-TE mode is selected. Then, the port is specified

for ISDN line only. Refer to the following figure for reference.

Vigor2930 Series User’s Guide

14

This page is left blank.

igor2930 Series User’s Guide

15

C

C

o

o

n

n

f

f

i

i

g

g

u

u

r

r

i

i

n

n

g

g

B

B

a

a

s

s

i

i

c

c

S

S

e

e

t

t

t

t

i

i

n

n

g

g

s

s

For use the router properly, it is necessary for you to change the password of web

configuration for security and adjust primary basic settings.

This chapter explains how to setup a password for an administrator and how to adjust basic

settings for accessing Internet successfully. Be aware that only the administrator can change

the router configuration.

2.1 Changing Password

To change the password for this device, you have to access into the web browse with default

password first.

1.

Make sure your computer connects to the router correctly.

Notice:

You may either simply set up your computer to get IP

dynamically from the router or set up the IP address of the computer to be

the same subnet as

the default IP address of Vigor router 192.168.1.1

.

For the detailed information, please refer to the later section - Trouble

Shooting of this guide.

2.

Open a web browser on your PC and type

http://192.168.1.1.

A pop-up window will

open to ask for username and password. Please type default values (both username and

password are Null) on the window for the first time accessing and click

OK

for next

screen.

3.

Now, the

Main Screen

will pop up.

Vigor2930 Series User’s Guide

16

Note:

The home page will change slightly in accordance with the router you have.

4.

Go to

System

Maintenance

page and choose

Administrator Password

.

5.

Enter the login password (the default is blank) on the field of

Old Password

. Type a

new one in the field of

New Password

and retype it on the field of

Retype New

Password

. Then click

OK

to continue.

6.

Now, the password has been changed. Next time, use the new password to access the

Web Configurator for this router.

igor2930 Series User’s Guide

17

2.2 Quick Start Wizard

If your router can be under an environment with high speed NAT, the configuration provide

here can help you to deploy and use the router quickly. The first screen of

Quick Start

Wizard

is entering login password. After typing the password, please click

Next

.

On the next page as shown below, please select the WAN interface that you use. Choose

Auto negotiation

as the physical type for your router. Then click

Next

for next step.

On the next page as shown below, please select the appropriate Internet access type

according to the information from your ISP. For example, you should select PPPoE mode if

the ISP provides you PPPoE interface. Then click

Next

for next step.