Page 151 / 173
Scroll up to view Page 146 - 150
Vigor2900 Series User’s Guide
145
5.2 Create a Remote Dial-in User Connection Between the
Teleworker and Headquarter
The other common case is that you, as a teleworker, may want to connect to the enterprise
network securely. According to the network structure as shown in the below illustration, you
may follow the steps to create a Remote User Profile and install Smart VPN Client on the
remote host.
Settings in VPN Router in the enterprise office:
1.
Choose
VPN and Remote Access Setup
on the
Advanced Setup
group.
2.
Select
Remote Access Control
Setup
. The following page will appear. Enable the
necessary VPN service and click
OK
.
3.
Then, return to
VPN and Remote Access Setup
page and choose
PPP General Setup
.
4.
For using PPP based services, such as PPTP, L2TP, you have to set general settings in
PPP General Setup
.
Page 152 / 173
Vigor2900 Series User’s Guide
146
For using IPSec-based service, such as IPSec or L2TP with IPSec Policy, you have to set
general settings in
IKE/IPSec General Setup
, such as the pre-shared key that both
parties have known.
5.
Return to
VPN and Remote Access Setup
page and choose
Remote User Profile Setup
(Teleworker).
Click on one index number to edit a profile.
6.
Set
Dial-In
settings as shown below to allow the remote user dial-in to build VPN
connection.
If an
IPSec-based
service is selected, you may further specify the remote peer IP
Address, IKE Authentication Method and IPSec Security Method for this Dial-In
Page 153 / 173
Vigor2900 Series User’s Guide
147
connection. Otherwise, it will apply the settings defined in
IPSec General Setup
above.
If a
PPP-based
service is selected, you should further specify the remote peer IP Address,
Username, Password, and VJ Compression for this Dial-In connection.
Settings in the remote host:
1.
For Win98/ME, you may use "Dial-up Networking" to create the PPTP tunnel to Vigor
router.
For Win2000/XP, please use "Network and Dial-up connections" or “Smart VPN
Client”, complimentary software to help you create PPTP, L2TP, and L2TP over IPSec
tunnel. You can find it in CD-ROM in the package or go to www.draytek.com download
center. Install as instructed.
2.
After successful installation, for the first time user, you should click on the
Step 0.
Configure
button. Reboot the host.
Page 154 / 173
Vigor2900 Series User’s Guide
148
3.
In
Step 2. Connect to VPN Server
, click
Insert
button to add a new entry.
If an IPSec-based service is selected as shown below,
You may further specify the method you use to get IP, the security method, and
authentication method. If the Pre-Shared Key is selected, it should be consistent with the
one set in VPN router.
Page 155 / 173
Vigor2900 Series User’s Guide
149
If a PPP-based service is selected, you should further specify the remote VPN server IP
address, Username, Password, and encryption method. The User Name and Password
should be consistent with the one set up in the VPN router. To use default gateway on
remote network means that all the packets of remote host will be directed to VPN server
then forwarded to Internet. This will make the remote host seem to be working in the
enterprise network.
4.
Click
Connect
button to build connection. When the connection is successful, you will
find a green light on the right down corner.
19216811.live