DrayTek Vigor2860Vn-plus Router Manual PDF (Setup & Configuration Guide)

Page 111 / 794 Scroll up to view Page 106 - 110

Vigor2860 Series User’s Guide

97

TTL value is set by telnet command.

MTU

It means Max Transmit Unit for packet. The default setting

is 1492.

RIP Protocol

Routing Information Protocol is abbreviated as RIP

（

RFC1058

）

specifying how routers exchange routing

tables information. Click

Enable RIP

for activating this

function.

Bridge Mode

If you choose

Bridged IP

as the protocol, you can check

this box to invoke the function. The router will work as a

bridge modem.

WAN IP Network

Settings

This group allows you to obtain an IP address automatically

and allows you type in IP address manually.

WAN IP Alias

- If you have multiple public IP addresses

and would like to utilize them on the WAN interface, please

use WAN IP Alias. You can set up to 32 public IP

addresses other than the current one you are using. Notice

that this setting is available for WAN1 only. Type the

additional WAN IP address and check the Enable box. Then

click

OK

to exit the dialog.

Obtain an IP address automatically

– Click this button to

obtain the IP address automatically.



Router Name

– Type in the router name

provided by ISP.



Domain Name

– Type in the domain name that

you have assigned.

DHCP Client Identifier for some ISP -



Enable:

Check the box to specify username and

password as the DHCP client identifier for some

ISP.

Page 112 / 794

Vigor2860 Series User’s Guide

98



Username:

Type a name as username. The

maximum length of the user name you can set is

63 characters.



Password:

Type a password. The maximum

length of the password you can set is 62

characters.

Specify an IP address

– Click this radio button to specify

some data.



IP Address

– Type in the private IP address.



Subnet Mask

– Type in the subnet mask.



Gateway IP Address

– Type in gateway IP

address.

Default MAC Address

– Type in MAC address for the

router. You can use

Default MAC Address

or specify

another MAC address for your necessity.

Specify a MAC Address

– Type in the MAC address for

the router manually.

DNS Server IP Address

Type in the primary IP address for the router. If necessary,

type in secondary IP address for necessity in the future.

After finishing all the settings here, please click

OK

to activate them.

Details Page for PPPoE in WAN2

To choose PPPoE as the accessing protocol of the Internet, please select

PPPoE

from the

WAN>

>

Internet Access >>WAN2

page. The following web page will be shown.

Available settings are explained as follows:

Item

Description

Enable/Disable

Click

Enable

for activating this function. If you click

Disable

, this function will be closed and all the settings that

you adjusted in this page will be invalid.

Page 113 / 794

Vigor2860 Series User’s Guide

99

ISP Access Setup

Enter your allocated username, password and authentication

parameters according to the information provided by your

ISP.

Service Name (Optional)

- Enter the description of the

specific network service.

Username

– Type in the username provided by ISP in this

field.

The maximum length of the user name you can set is 63

characters.

Password

– Type in the password provided by ISP in this

field.

The maximum length of the password you can set is 62

characters.

Index (1-15) in Schedule Setup -

You can type in four sets

of time schedule for your request. All the schedules can be

set previously in

Application >> Schedule

web page and

you can use the number that you have set in that web page.

WAN Connection

Detection

Such function allows you to verify whether network

connection is alive or not through ARP Detect or Ping

Detect.

Mode

– Choose

ARP Detect

or

Ping Detect

for the system

to execute for WAN detection.

Ping IP

– If you choose Ping Detect as detection mode, you

have to type IP address in this field for pinging.

TTL (Time to Live)

– Displays value for your reference.

TTL value is set by telnet command.

MTU

It means Max Transmit Unit for packet.

PPP/MP Setup

PPP Authentication

– Select

PAP only

or

PAP or CHAP

for PPP.

Idle Timeout

– Set the timeout for breaking down the

Internet after passing through the time without any action.

IP Address Assignment

Method (IPCP)

Usually ISP dynamically assigns IP address to you each

time you connect to it and request. In some case, your ISP

provides service to always assign you the same IP address

whenever you request. In this case, you can fill in this IP

address in the Fixed IP field. Please contact your ISP before

you want to use this function.

WAN IP Alias

- If you have multiple public IP addresses

and would like to utilize them on the WAN interface, please

use WAN IP Alias. You can set up to 32 public IP

addresses other than the current one you are using. Type the

additional WAN IP address and check the Enable box. Then

click

OK

to exit the dialog.

Fixed IP

– Click

Yes

to use this function and type in a

fixed IP address in the box of

Fixed IP Address

.

Default MAC Address

– You can use

Default MAC

Address

or specify another MAC address by typing on the

boxes of MAC Address for the router.

Specify a MAC Address –

Type the MAC address for the

Page 114 / 794

Vigor2860 Series User’s Guide

100

router manually.

After finishing all the settings here, please click

OK

to activate them.

Details Page for Static or Dynamic IP in WAN2

For static IP mode, you usually receive a fixed public IP address or a public subnet, namely

multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a

Cable service provider will offer a fixed public IP, while a DSL service provider will offer a

public subnet. If you have a public subnet, you could assign an IP address or many IP address

to the WAN interface.

To use

Static or Dynamic IP

as the accessing protocol of the internet, please click the

Static

or Dynamic IP

tab. The following web page will be shown.

Available settings are explained as follows:

Item

Description

Enable / Disable

Click

Enable

for activating this function. If you click

Disable

, this function will be closed and all the settings that

you adjusted in this page will be invalid.

Keep WAN Connection

Normally, this function is designed for Dynamic IP

environments because some ISPs will drop connections if

there is no traffic within certain periods of time. Check

Enable PING to keep alive

box to activate this function.

PING to the IP

- If you enable the PING function, please

specify the IP address for the system to PING it for keeping

alive.

PING Interval

- Enter the interval for the system to

Page 115 / 794

Vigor2860 Series User’s Guide

101

execute the PING operation.

WAN Connection

Detection

Such function allows you to verify whether network

connection is alive or not through ARP Detect or Ping

Detect.

Mode

– Choose

ARP Detect

or

Ping Detect

for the system

to execute for WAN detection.

Ping IP

– If you choose Ping Detect as detection mode, you

have to type IP address in this field for pinging.

TTL (Time to Live)

– Displays value for your reference.

TTL value is set by telnet command.

MTU

It means Max Transmit Unit for packet.

RIP Protocol

Routing Information Protocol is abbreviated as RIP

（

RFC1058

）

specifying how routers exchange routing

tables information. Click

Enable RIP

for activating this

function.

WAN IP Network

Settings

This group allows you to obtain an IP address automatically

and allows you type in IP address manually.

WAN IP Alias

- If you have multiple public IP addresses

and would like to utilize them on the WAN interface, please

use WAN IP Alias. You can set up to 32 public IP

addresses other than the current one you are using.

Obtain an IP address automatically

– Click this button to

obtain the IP address automatically if you want to use

Dynamic IP

mode.



Router Name

: Type in the router name provided

by ISP.



Domain Name

: Type in the domain name that

you have assigned.

DHCP Client Identifier for some ISP



Enable:

Check the box to specify username and

password as the DHCP client identifier for some

ISP.



Username:

Type a name as username. The

maximum length of the user name you can set is

63 characters.



Password:

Type a password. The maximum

length of the password you can set is 62

characters.

Specify an IP address

– Click this radio button to specify

some data if you want to use

Static IP

mode.



IP Address

: Type the IP address.



Subnet Mask

: Type the subnet mask.



Gateway IP Address

: Type the gateway IP

address.

Default MAC Address

: Click this radio button to use

default MAC address for the router.

Specify a MAC Address

: Some Cable service providers

specify a specific MAC address for access authentication.

Rate

Popular DrayTek Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share