1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor2860Vn-plus
    5. /
  5. 27
Page 131 / 794 Scroll up to view Page 126 - 130
Vigor2860 Series User’s Guide
117
Add VLAN Header –
Check the box to enable the
following two options.
VLAN Tag –
Type the value as the VLAN ID number.
Valid settings are in the range from 1 to 4095. The network
traffic flowing on each channel will be identified by the
system via their VLAN Tags. Channels using the same
WAN type may not configure the same VLAN tag value.
Priority –
Choose the number to determine the packet
priority for such VLAN. The range is from 0 to 7.
ATM OoS
QoS Type
- Select a proper QoS type for the channel.
Type the values for PCR, SCR and MBS respectively.
Bridge mode
Enable –
Click it to enable Bridge mode for such channel.
Physical Members –
Group the physical ports by checking
the corresponding check box(es) for applying the bridge
connection.
After finished the above settings, click
OK
to save the settings.
WAN links for Channel 5, 6 and 7 are provided for router-borne application such as
TR-069
.
The settings must be applied and obtained from your ISP. For your special request, please
contact with your ISP and then click WAN link of Channel 5, 6 or 7 to configure your router.
Page 132 / 794
Vigor2860 Series User’s Guide
118
Available settings are explained as follows:
Item
Description
Multi-VLAN Channel
5/6/7
Enable –
Click it to enable the configuration of this
channel.
Disable –
Click it to disable the configuration of this
channel.
WAN Type
The connections and interfaces created in every channel
may select a specific WAN type to be built upon. In the
Multi-PVC application, only the Ethernet WAN type is
available. The user will be able to select the physical WAN
interface the channel shall use here.
Page 133 / 794
Vigor2860 Series User’s Guide
119
General Settings
VPI
- Type in the value provided by your ISP.
VCI
- Type in the value provided by your ISP.
Protocol
- Select a proper protocol for this channel.
Encapsulation
- Choose a proper type for this channel. The
types will be different according to the protocol setting that
you choose.
Add VLAN Header –
Check the box to enable the
following two options.
VLAN Tag –
Type the value as the VLAN ID number.
Valid settings are in the range from 1 to 4095. The network
traffic flowing on each channel will be identified by the
system via their VLAN Tags. Channels using the same
WAN type may not configure the same VLAN tag value.
Priority –
Choose the number to determine the packet
priority for such VLAN. The range is from 0 to 7.
ATM OoS
QoS Type
- Select a proper QoS type for the channel.
Type the values for PCR, SCR and MBS respectively.
Open Port-based Bridge
Connection for this
Channel
The settings here will create a bridge between the LAN
ports selected and the WAN. The WAN interface of the
bridge connection will be built upon the WAN type selected
using the VLAN tag configured.
Physical Members –
Group the physical ports by checking
the corresponding check box(es) for applying the port-based
bridge connection.
Open WAN Interface for
this Channel
Check the box to enable relating function.
WAN Application –
Management
– It can be specified for general management
(Web configuration/telnet/TR069). If you choose
Management, the configuration for this VLAN will be
effective for Web configuration/telnet/TR069.
IPTV
- The IPTV configuration will allow the WAN
interface to send IGMP packets to IPTV servers.
WAN Connection
Detection
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system
Page 134 / 794
Vigor2860 Series User’s Guide
120
to execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference.
TTL value is set by telnet command.
PPPoE/PPPoA Client
Enter your allocated username, password and authentication
parameters according to the information provided by your
ISP.
ISP Name
– Type in the name of your ISP.
Username
– Type in the username provided by ISP in this
field. The maximum length of the name you can set is 80
characters.
Password
– Type in the password provided by ISP in this
field. The maximum length of the password you can set is
48 characters.
PPP Authentication
– Select
PAP only
or
PAP or CHAP
for PPP.
Always On
– Check it to keep the network connection
always.
Idle Timeout
– Set the timeout for breaking down the
Internet after passing through the time without any action.
Fixed IP
– Click
Yes
to use this function and type in a
fixed IP address in the box of
Fixed IP Address
.
MPoA (RFC1483/2684)
Obtain an IP address automatically
– Click this button to
obtain the IP address automatically.
Router Name
– Type in the router name provided by
ISP.
Domain Name
– Type in the domain name that you
have assigned.
Specify an IP address
– Click this radio button to specify
some data.
IP Address
– Type in the private IP address.
Subnet Mask
– Type in the subnet mask.
Gateway IP Address
– Type in gateway IP address.
DNS Server IP Address -
Type in the primary IP address
for the router if you want to use
Static IP
mode. If
necessary, type in secondary IP address for necessity in the
future.
After finished the above settings, click
OK
to save the settings and return to previous page.
Advanced
Such configuration is applied to upstream packets. Such information will be provided by ISP.
Please contact with your ISP for detailed information.
Page 135 / 794
Vigor2860 Series User’s Guide
121
Available settings are explained as follows:
Item
Description
QoS Type
Select a proper QoS type for the channel according to the
information that your ISP provides.
PCR
It represents Peak Cell Rate. The default setting is “0”.
SCR
It represents Sustainable Cell Rate. The value of SCR must
be smaller than PCR.
MBS
It represents
Maximum Burst Size.
The range of the
value is 10 to 50.
PVC to PVC Binding
It allows the enabled PVC channel to use the same ADSL
connection settings of another PVC channel. Please choose
the PVC channel via the drop down list.
After finished the above settings, click
OK
to save the settings.

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top