Page 706 / 794
Scroll up to view Page 701 - 705
Vigor2860 Series User’s Guide
692
Telnet Command: srv dhcp leasetime
This command can set the lease time for the DHCP server.
srv dhcp leasetime
[?]
srv dhcp leasetime
[Lease Time (sec)]
Syntax Description
Parameter
Description
?
It means to display current leasetime used for the DHCP
server.
Lease Time (sec)
It means the lease time that DHCP server can use. The
unit is second.
Example
> srv dhcp leasetime ?
% srv dhcp leasetime <Lease Time (sec.)>
% Now: 86400
>
Telnet Command: srv dhcp nodetype
This command can set the node type for the DHCP server.
srv dhcp nodetype
<count>
Syntax Description
Parameter
Description
count
It means to specify a type for node.
1. B-node
2. P-node
4. M-node
8. H-node
Example
> srv dhcp nodetype 1
> srv dhcp nodetype ?
%% srv dhcp nodetype <count>
Page 707 / 794
Vigor2860 Series User’s Guide
693
%% 1. B-node 2. P-node 4. M-node 8. H-node
% Now: 1
Page 708 / 794
Vigor2860 Series User’s Guide
694
Telnet Command: srv dhcp primWINS
This command can set the primary IP address for the DHCP server.
srv dhcp primWINS
[WINS IP address]
srv dhcp primWINS clear
Syntax Description
Parameter
Description
WINS IP address
It means the IP address of primary WINS server.
clear
It means to remove the IP address settings of primary
WINS server.
Example
> srv dhcp primWINS 192.168.1.88
> srv dhcp primWINS ?
%% srv dhcp primWINS <WINS IP address>
%% srv dhcp primWINS clear
% Now: 192.168.1.88
Telnet Command: srv dhcp secWINS
This command can set the secondary IP address for the DHCP server.
srv dhcp secWINS
[WINS IP address]
srv dhcp secWINS clear
Syntax Description
Parameter
Description
WINS IP address
It means the IP address of secondary WINS server.
clear
It means to remove the IP address settings of second
WINS server.
Example
> srv dhcp secWINS ?
%% srv dhcp secWINS <WINS IP address>
%% srv dhcp secWINS clear
Page 709 / 794
Vigor2860 Series User’s Guide
695
Page 710 / 794
Vigor2860 Series User’s Guide
696
Telnet Command: srv dhcp expired_RecycleIP
This command can set the time to check if the IP address can be assigned again by DHCP
server or not.
srv dhcp expRecycleIP
<sec time>
Syntax Description
Parameter
Description
sec time
It means to set the time (5~300 seconds) for checking if
the IP can be assigned again or not.
Example
Vigor> srv dhcp expRecycleIP 250
% DHCP expired_RecycleIP = 250
Telnet Command: srv dhcp tftp
This command can set the TFTP server as the DHCP server.
srv dhcp tftp
<TFTP server name>
Syntax Description
Parameter
Description
TFTP server name
It means to type the name of TFTP server.
Example
> srv dhcp tftp TF123
> srv dhcp tftp ?
%% srv dhcp tftp <TFTP server name>
% Now: TF123
Telnet Command: srv dhcp option
This command can set the custom option for the DHCP server.
srv dhcp option
-h
srv dhcp option
-l
srv dhcp option
-d [idx]
srv dhcp option
-e [1 or 0] -c [option number] -v [option value]
srv dhcp option
-e [1 or 0] -c [option number] -a [option value]
srv dhcp option -
e [1 or 0] -c [option number] -x [option value]
srv dhcp option
-u [idx unmber]
19216811.live