Page 696 / 794
Scroll up to view Page 691 - 695
Vigor2860 Series User’s Guide
682
Telnet Command: show dmz
This command displays current status of DMZ host.
Example
> show dmz
%
WAN1 DMZ mapping status:
Index
Status
WAN1 aux IP
Private IP
----------------------------------------------------
1
Disable 172.16.3.221
2
Disable 192.168.1.65
Telnet Command: show dns
This command displays current status of DNS setting
Example
> show dns
%%
Domain name server settings:
%
Primary DNS: [Not set]
%
Secondary DNS: [Not set]
Telnet Command: show openport
This command displays current status of open port setting.
Example
> show openport
%%
Openport settings:
Index
Status
Comment
Local IP Address
********************************************************
No data entry.
Telnet Command: show nat
This command displays current status of NAT.
Example
> show nat
Port Redirection Running Table:
Index
Protocol
Public Port
Private IP
Private Port
1
0
0
0.0.0.0
0
2
0
0
0.0.0.0
0
3
0
0
0.0.0.0
0
4
0
0
0.0.0.0
0
Page 697 / 794
Vigor2860 Series User’s Guide
683
5
0
0
0.0.0.0
0
6
0
0
0.0.0.0
0
7
0
0
0.0.0.0
0
8
0
0
0.0.0.0
0
9
0
0
0.0.0.0
0
10
0
0
0.0.0.0
0
11
0
0
0.0.0.0
0
12
0
0
0.0.0.0
0
13
0
0
0.0.0.0
0
14
0
0
0.0.0.0
0
15
0
0
0.0.0.0
0
16
0
0
0.0.0.0
0
17
0
0
0.0.0.0
0
18
0
0
0.0.0.0
0
19
0
0
0.0.0.0
0
20
0
0
0.0.0.0
0
--- MORE ---
['q': Quit, 'Enter': New Lines, 'Space Bar': Next Page]
Telnet Command: show portmap
This command displays the table of NAT Active Sessions.
Example
> show portmap
--------------------------------------------------------------------------
Private_IP:Port Pseudo_IP:Port Peer_IP:Port [Timeout/Protocol/Flag]
--------------------------------------------------------------------------
Telnet Command: show pmtime
This command displays the reuse time of NAT session.
Level0: It is the default setting.
Level1: It will be applied when the NAT sessions are smaller than 25% of the default setting.
Level2: It will be applied when the NAT sessions are smaller than the eighth of the default
setting.
Example
> show pmtime
Level0 TCP=86400001 UDP=300001 ICMP=10001
Level1 TCP=600000 UDP=90000 ICMP=7000
Level2 TCP=60000 UDP=30000 ICMP=5000
Telnet Command: show session
This command displays current status of current session.
Page 698 / 794
Vigor2860 Series User’s Guide
684
Example
> show session
% Maximum Session Number: 10000
% Maximum Session Usage: 49
% Current Session Usage: 0
% Current Session Used(include waiting for free): 0
% WAN1 Current Session Usage: 0
Telnet Command: show status
This command displays current status of LAN and WAN connections.
Example
> show status
System Uptime:20:36:35
LAN Status
Primary DNS:8.8.8.8
Secondary DNS:8.8.4.4
IP Address:192.168.1.1
Tx Rate:12923
Rx Rate:8152
WAN 1 Status: Disconnected
Enable:Yes
Line:xDSL
Name:tcom
Mode:Static IP
Up Time:0:00:00
IP:172.16.3.221
GW
IP:172.16.3.2
TX Packets:0
TX Rate:0
RX Packets:0
RX Rate:0
ADSL Information:
ADSL Firmware Version:05-04-04-04-00-01
Mode:
State:TRAINING
TX Block:0
RX Block:0
Corrected Blocks:0
Uncorrected Blocks:0
UP Speed:0
Down Speed:0
SNR Margin:0
Loop Att.:0
Telnet Command: show adsl
This command displays current status of ADSL.
Example
> Vigor> show adsl
--------------------------- ATU-R Info (hw: annex A, f/w: annex A) -----------
Running Mode
:
T1.413
State
: TRAINING
DS Actual Rate
:
0 bps
US Actual Rate
:
0 bps
DS Attainable Rate
:
0 bps
US Attainable Rate
:
0 bps
DS Path Mode
:
Fast
US Path Mode
:
Fast
DS Interleave Depth
:
0
US Interleave Depth
:
0
NE Current Attenuation
:
0 dB
Cur SNR Margin
:
0
dB
DS actual PSD
:
0. 0 dB
US actual PSD
:
0. 0
dB
ADSL Firmware Version
: 05-04-04-04-00-01
-------------------------------- ATU-C Info ---------------------------------
Page 699 / 794
Vigor2860 Series User’s Guide
685
Far Current Attenuation :
0 dB
Far SNR Margin
:
0
dB
CO ITU Version[0]
: 00000000
CO ITU Version[1]
: 00000000
DSLAM CHIPSET VENDOR
: < ADI >
Telnet Command: show statistic
This command displays statistics for WAN interface.
show statistic
show statistic reset
[interface]
Syntax Description
Parameter
Description
reset
It means to reset the transmitted/received bytes to Zero.
interface
It means to specify WAN1 ~WAN5 (including multi-PVC)
interface for displaying related statistics.
Example
> show statistic
WAN1 total TX: 0 Bytes ,RX: 0 Bytes
WAN2 total TX: 0 Bytes ,RX: 0 Bytes
WAN3 total TX: 0 Bytes ,RX: 0 Bytes
WAN4 total TX: 0 Bytes ,RX: 0 Bytes
WAN5 total TX: 0 Bytes ,RX: 0 Bytes
>
Page 700 / 794
Vigor2860 Series User’s Guide
686
Telnet Command: srv dhcp badip
This command is reserved for future using.
srv dhcp badip
Example
> srv dhcp badip
>
Telnet Command: srv dhcp public
This command allows users to configure DHCP server for second subnet.
srv dhcp public
start [IP address]
srv dhcp public
cnt
[IP counts]
srv dhcp public
status
srv dhcp public
add [MAC Addr XX-XX-XX-XX-XX-XX]
srv dhcp public
del [MAC Addr XX-XX-XX-XX-XX-XX/all/ALL]
Syntax Description
Parameter
Description
start
It means the starting point of the IP address pool for the
DHCP server.
IP address
It means to specify an IP address as the starting point in
the IP address pool.
cnt
It means the IP count number.
IP counts
It means to specify the number of IP addresses in the
pool. The maximum is 10.
status
It means the execution result of this command.
add
It means creating a list of hosts to be assigned.
del
It means removing the selected MAC address.
MAC Addr
It means to specify MAC Address of the host.
all/ALL
It means all of the MAC addresses.
Example
Vigor> ip route add 192.168.1.56 255.255.255.0
192.168.1.12 3 default
Vigor> srv dhcp public status
19216811.live