Page 701 / 794
Scroll up to view Page 696 - 700
Vigor2860 Series User’s Guide
687
Index
MAC Address
Telnet Command: srv dhcp dns1
This command allows users to set Primary IP Address for DNS Server in LAN.
srv dhcp dns1
[?]
srv dhcp dns1
[DNS IP address]
Syntax Description
Parameter
Description
?
It means to display current IP address of DNS 1 for the
DHCP server.
DNS IP address
It means the IP address that you want to use as DNS1.
Note:
The IP Routed Subnet DNS must be the same as
NAT Subnet DNS).
Example
>
srv dhcp dns1 168.95.1.1
% srv dhcp dns1 <DNS IP address>
% Now: 168.95.1.1
(IP Routed Subnet dns same as NAT Subnet dns)
Telnet Command: srv dhcp dns2
This command allows users to set Secondary IP Address for DNS Server in LAN.
srv dhcp dns2
[?]
srv dhcp dns2
[DNS IP address]
Syntax Description
Parameter
Description
?
It means to display current IP address of DNS 2 for the
DHCP server.
DNS IP address
It means the IP address that you want to use as DNS2.
Note:
The IP Routed Subnet DNS must be the same as
NAT Subnet DNS).
Example
> srv dhcp dns2 10.1.1.1
Page 702 / 794
Vigor2860 Series User’s Guide
688
% srv dhcp dns2 <DNS IP address>
% Now: 10.1.1.1
(IP Routed Subnet dns same as NAT Subnet dns)
Page 703 / 794
Vigor2860 Series User’s Guide
689
Telnet Command: srv dhcp frcdnsmanl
This command can force the router to invoke DNS Server IP address.
srv dhcp frcdnsmanl
[on]
srv dhcp frcdnsmanl
[off]
Syntax Description
Parameter
Description
?
It means to display the current status.
on
It means to use manual setting for DNS setting.
Off
It means to use auto settings acquired from ISP.
Example
> srv dhcp frcdnsmanl on
% Domain name server now is using manual settings!
> srv dhcp frcdnsmanl off
% Domain name server now is using auto settings!
Telnet Command: srv dhcp gateway
This command allows users to specify gateway address for DHCP server.
srv dhcp gateway
[?]
srv dhcp gateway
[Gateway IP]
Syntax Description
Parameter
Description
?
It means to display current gateway that you can use.
Gateway IP
It means to specify a gateway address used for DHCP
server.
Example
> srv dhcp gateway 192.168.2.1
This setting will take effect after rebooting.
Please use "sys reboot" command to reboot the router.
Page 704 / 794
Vigor2860 Series User’s Guide
690
Telnet Command: srv dhcp ipcnt
This command allows users to specify IP counts for DHCP server.
srv dhcp ipcnt
[?]
srv dhcp ipcnt
[IP counts]
Syntax Description
Parameter
Description
?
It means to display current used IP count number.
IP counts
It means the number that you have to specify for the
DHCP server.
Example
> srv dhcp ipcnt ?
% srv dhcp ipcnt <IP counts>
% Now: 150
Telnet Command: srv dhcp off
This function allows users to turn off DHCP server. It needs rebooting router, please type "sys
reboot" command to reboot router.
Telnet Command: srv dhcp on
This function allows users to turn on DHCP server. It needs rebooting router, please type "sys
reboot" command to reboot router.
Telnet Command: srv dhcp relay
This command allows users to set DHCP relay setting.
srv dhcp relay servip
[server ip]
srv dhcp relay subnet
[index]
Syntax Description
Parameter
Description
server ip
It means the IP address that you want to used as DHCP
server.
Index
It means subnet 1 or 2. Please type 1 or 2. The router
will invoke this function according to the subnet 1 or 2
specified here.
Example
> srv dhcp relay servip 192.168.1.46
Page 705 / 794
Vigor2860 Series User’s Guide
691
> srv dhcp relay subnet 2
>
srv dhcp relay servip ?
% srv dhcp relay servip <server ip>
% Now: 192.168.1.46
Telnet Command: srv dhcp startip
srv dhcp startip
[?]
srv dhcp startip
[IP address]
Syntax Description
Parameter
Description
?
It means to display current used start IP address.
IP address
It means the IP address that you can specify for the
DHCP server as the starting point.
Example
> srv dhcp startip 192.168.1.53
This setting will take effect after rebooting.
Please use "sys reboot" command to reboot the router.
Telnet Command: srv dhcp status
This command can display general information for the DHCP server, such as IP address, MAC
address, leased time, host ID and so on.
Example
> srv dhcp status
DHCP server: Relay Agent
Index
IP Address
MAC Address
Leased Time
HOST ID
1
192.168.1.113
00-05-5D-E4-D8-EE
17:20:08
A1000351
19216811.live