Page 626 / 794
Scroll up to view Page 621 - 625
Vigor2860 Series User’s Guide
612
1: Enable
0: Disable
Example
> ip6 dhcp client WAN2 –p 2008::1
> ip6 dhcp client WAN2 –a
Interface WAN2 has following DHCPv6 client settings:
DHCPv6 client enabled
request IA_PD whose IAID equals to 2008
> ip6 dhcp client WAN2 –n 1023456
> ip6 dhcp client WAN2 –a
Interface WAN2 has following DHCPv6 client settings:
DHCPv6 client enabled
request IA_NA whose IAID equals to 2008
> system reboot
Telnet Command: ip6 dhcp server
This command allows you to configure DHCPv6 server.
ip6 dhcp
server [-<command> <parameter>| ... ]
Syntax Description
Parameter
Description
server
It means the dhcp server settings.
[<command>
<parameter>|…]
The available commands with parameters are listed
below.
[…]
means that you can type in several commands in
one line.
-a
It means to show current DHCPv6 status.
-i<pool_min_addr>
It means to set the start IPv6 address of the address
pool.
-x<pool_max_addr>
It means to set the end IPv6 address of the address
pool.
-d<addr>
It means to set the first DNS IPv6 address.
-D<addr>
It means to set the second DNS IPv6 address.
Page 627 / 794
Vigor2860 Series User’s Guide
613
-c<parameter>
It means to send rapid commit to server.
1: Enable
0: Disable
-e<parameter>
It means to enable or disable the DHCPv6 server.
1: Enable
0: Disable
Example
> ip6 dhcp server -d FF02::1
> ip6 dhcp server -i ff02::1
> ip6 dhcp server -x ff02::3
> ip6 dhcp server -a
% Interface LAN has following DHCPv6 server settings:
%
DHCPv6 server disabled
%
maximum address of the pool: FF02::3
%
minimum address of the pool: FF02::1
%
1st DNS IPv6 Addr: FF02::1
Page 628 / 794
Vigor2860 Series User’s Guide
614
Telnet Command: ip6 internet
This command allows you to configure settings for accessing Internet.
ip6 internet
-W n -M n [-<command> <parameter> | ... ]
Syntax Description
Parameter
Description
-W n
W
means to set WAN interface and
n
means different
selections. Default is WAN1.
n=1: WAN1
n=2: WAN2
n=3: WAN3
.
.
n=X: WANx
-M n
M means to set Internet Access Mode (Mandatory) and
n means different modes (represented by 0 – 5)
n= 0: Offline,
n=1: PPP,
n=2: TSPC,
n=3: AICCU,
n=4: DHCPv6,
n=5: Static
n=6:6in4-Static
n=7:6rd
[<command>
<parameter>|…]
The available commands with parameters are listed
below.
[…]
means that you can type in several commands in
one line.
-m n
It means to set IPv6 MTU.
N = any value (0 means “unspecified”).
-u <username>
It means to set Username.
<username>= type a name as the username (maximum
63 characters).
Page 629 / 794
Vigor2860 Series User’s Guide
615
-p <password>
It means to set Password.
<password> = type a password (maximum 63
characters).
-s <server>
It means to set Tunnel Server IP.
<server>= IPv4 address or URL (maximum 63
characters).
-d <server>
It means to set the primary DNS Server IP.
<server>= type an IPv6 address for first DNS server.
-D <server>
It means to set the secondary DNS Server IP.
<server>= type an IPv6 address for second DNS server.
-t <dhcp/ra/none>
It means to set IPv6 PPP WAN test mode for DHCP or
RADVD.
<dhcp/ra/none>= type IPv6 address.
-V
It means to view IPv6 Internet Access Profile.
-o
It means to set AICCU always on.
1=On,
0=Off
Example
> ip6 internet -W 2 -M 2 -u 88886666 -p draytek123456 –s
amsterdam.freenet6.net
This setting will take effect after rebooting.
Please use "sys reboot" command to reboot the router.
> system reboot
Telnet Command: ip6 neigh
This command allows you to display IPv6 neighbour table.
ip6 neigh
-s[ inet6_addr] [eth_addr] [LAN|WAN1|WAN2]
ip6 neigh
-d [inet6_addr] [LAN|WAN1|WAN2]
ip6 neigh
-a [inet6_addr] [-N LAN|WAN1|WAN2]
Syntax Description
Parameter
Description
Page 630 / 794
Vigor2860 Series User’s Guide
616
-s
It means to add a neighbour.
-d
It means to delete a neighbour.
-a
It means to show neighbour status.
inet6_addr
Type an IPv6 address
eth_addr
Type submask address.
LAN|WAN1|WAN2
Specify an interface for the neighbor.
Example
> ip6 neigh -s 2001:2222:3333::1111 00:50:7F:11:ac:22:WAN2
Neighbour 2001:2222:3333::1111 successfully added!
> ip6 neigh -a
I/F
ADDR
MAC
STATE
-------------------------------------------------------------------------
LAN FF02::1
33-33-00-00-00-01
CONNECTED
WAN2 2001:5C0:1400:B::10B8
00-00-00-00-00-00
CONNECTED
WAN2 2001:2222:3333::1111
00-00-00-00-00-00
CONNECTED
WAN2 2001:2222:6666::1111
00-00-00-00-00-00
CONNECTED
WAN2 ::
00-00-00-00-00-00
CONNECTED
LAN
::
NONE
>
19216811.live