Page 611 / 794
Scroll up to view Page 606 - 610
Vigor2860 Series User’s Guide
597
ip telnet
[IP address][Port]
Syntax Description
Parameter
Description
IP address
Type the WAN or LAN IP address of the remote
device.
Port
Type a port number (e.g., 23).
Available settings: 0 ~65535.
Example
>
ip telnet 172.17.3.252 23
>
Telnet Command: ip rip
This command allows users to set the RIP (routing information protocol) of IP.
ip rip
[0/1/2]
Syntax Description
Parameter
Description
0/1/2
0 means disable; 1 means first subnet and 2 means
second subnet.
Example
> ip rip 1
%% Set RIP 1st subnet.
Page 612 / 794
Vigor2860 Series User’s Guide
598
Telnet Command: ip wanrip
This command allows users to set the RIP (routing information protocol) of WAN IP.
ip wanrip
[ifno] -e [0/1]
Syntax Description
Parameter
Description
ifno
It means the connection interface.
1: WAN1,2: WAN2, 3: PVC3,4: PVC4,5: PVC5
Note
: PVC3 ~PVC5 are virtual WANs.
-e
It means to disable or enable RIP setting for specified
WAN interface.
1: Enable the function of setting RIP of WAN IP.
0: Disable the function.
Example
> ip wanrip ?
Valid ex:ip wanrip <ifno> -e <0/1>
<ifno> 1: WAN1,2: WAN2
3: PVC3,4: PVC4,5: PVC5
-e <0/1>
0: disable, 1: enable
Now status:
WAN[1] Rip Protocol disable
WAN[2] Rip Protocol disable
WAN[3] Rip Protocol disable
WAN[4] Rip Protocol disable
WAN[5] Rip Protocol disable
> ip wanrip 5 -e 1
> ip wanrip ?
Valid ex:ip wanrip <ifno> -e <0/1>
<ifno> 1: WAN1,2: WAN2
3: PVC3,4: PVC4,5: PVC5
-e <0/1>
0: disable, 1: enable
Now status:
WAN[1] Rip Protocol disable
WAN[2] Rip Protocol disable
Page 613 / 794
Vigor2860 Series User’s Guide
599
WAN[3] Rip Protocol disable
WAN[4] Rip Protocol disable
WAN[5] Rip Protocol enable
>
Page 614 / 794
Vigor2860 Series User’s Guide
600
Telnet Command: ip route
This command allows users to set static route.
ip route
add
[dst] [netmask][gateway][ifno][rtype]
ip route
del
[dst] [netmask][rtype]
ip route
status
ip route
cnc
ip route
default
[wan1/wan2/off/?]
ip route
clean
[1/0]
Syntax Description
Parameter
Description
add
It means to add an IP address as static route.
del
It means to delete specified IP address.
status
It means current status of static route.
dst
It means the IP address of the destination.
netmask
It means the netmask of the specified IP address.
gateway
It means the gateway of the connected router.
ifno
It means the connection interface.
3=WAN1 5=WAN3,6=WAN4,7=WAN5
However,
WAN3, WAN4, WAN5 are router-borne WANs
rtype
It means the type of the route.
default : default route;
static: static route.
cnc
It means current IP range for CNC Network.
default
Set WAN1/WAN2/off as current default route.
clean
Clean all of the route settings.
1: Enable the function.
0: Disable the function.
Example
> ip route add 172.16.2.0 255.255.255.0 172.16.2.4 3 static
Page 615 / 794
Vigor2860 Series User’s Guide
601
> ip route status
Codes: C - connected, S - static, R - RIP, * - default, ~ - private
C~
192.168.1.0/
255.255.255.0 is directly connected, LAN1
S
172.16.2.0/
255.255.255.0 via 172.16.2.4, WAN1
19216811.live