Page 346 / 794
Scroll up to view Page 341 - 345
Vigor2860 Series User’s Guide
332
How to edit the wireless LAN profile?
1.
Check the box on the left side of the selected profile.
2.
Click the
Edit
button to display the following page.
Note
: The function of
Auto Provision
is available for the default WLAN profile.
3.
After finished the general settings configuration, click
Next
to open the following page for
2.4G wireless security settings.
Page 347 / 794
Vigor2860 Series User’s Guide
333
4.
After finished the above web page configuration, click
Next
to open the following page
for 5G wireless security settings.
5.
When you finished the above web page configuration, click
Finish
to exit and return to
the first page. The modified WLAN profile will be shown on the web page.
Page 348 / 794
Vigor2860 Series User’s Guide
334
3.14.3 AP Maintenance
Vigor router can execute configuration backup, configuration restoration, firmware upgrade
and remote reboot for the APs managed by the router. It is very convenient for the
administrator to process maintenance without accessing into the web user interface of the
access point.
Note
: Config Backup can be performed to one AP at one time. Others functions (e.g.,
Config Restore, Firmware Upgrade, Remote Reboot can be performed to more than one
AP at one time by using Vigor2860.
Available settings are explained as follows:
Item
Description
Action
There are four actions provided by Vigor router to manage the
access points.
File/Path
Specify the file and the path which will be used to perform
Config Restore
or
Firmware Upgrade
.
Select Device
Display all the available access points managed by Vigor
router. Simply click << or >> to move the device(s) between
Select Device
and
Selected Device
areas.
Selected Device
Display the access points that will be applied by such function
after clicking OK.
After finishing all the settings here, please click
OK
to perform the action.
Page 349 / 794
Vigor2860 Series User’s Guide
335
3.14.4 AP Map
This function is helpful to determine the best location for VigorAP in a room. A floor plan of a
room is required to be uploaded first. By dragging and dropping available VigorAP icon from
the list to the floor plan, the placement with the best wireless coverage will be clearly
indicated through simulated signal strength.
Available settings are explained as follows:
Item
Description
Check the box to view or edit the AP Map.
Location
Display a brief description (e.g., ground, roof) of the AP Map.
AP
Display the model name and number of VigorAP located on
the AP map.
AP Signal Strength
Display the pre-defined signal strength of the AP map.
Dimension(m)
Display the width and length of the AP map.
Map
Display if the uploaded file for AP map is ready or not.
View
Click it to review the layout for the selected AP map.
Edit
Click it to modify the geographic settings for the selected AP
Map profile.
Cancel
Click it to cancel the configuration in such page.
Set to Factory Default
Click the link to clear current page configuration.
Page 350 / 794
Vigor2860 Series User’s Guide
336
Editing the AP Map Profile
1.
Select an index
and click
Edit
to open the following web page.
Available settings are explained as follows:
Item
Description
Location (Profile Name)
Type a name (e.g., groudfloor) for the AP map profile.
Dimensions
Type the real length and width of the uploaded map.
Upload Map
Click the
Select
button to choose an image file (only JPG
and PNG are supported) for floor plan.
Cancel
Click it to cancel the configuration.
Next
Click it to go to the next configuration page.
2.
Click
Next
. The configuration page with floor plan will be shown as follows.
19216811.live